Datasheet
DATA
SHEET IEC Inlet Filters FN 9262
Rated currents up to 10 A
Integrated dual fuse holder
Optional safety version (A type)
Complies with IEC/EN 60601-1 (B type)
Snap-in versions (S type)
Good attenuation performance
Performance indicators
Technical specications
Operating voltage
250 VAC, 50/60 Hz
Operating frequency
DC to 400 Hz
Rated currents
1 to 10 A @ 40°C max.
High potential test voltage
P –> PE 2000 VAC for 2 sec (standard types)
P –> PE 2500 VAC for 2 sec (B types)
P –> N 760 VAC for 2 sec
Protection category
IP 40 according to IEC 60529
Temperature range (operation and storage)
-25°C to +85°C (25/85/21)
Design corresponding to
UL 60939-3, CSA Std C22.2 No. 8, IEC/EN 60939-3, GB/T
15287, GB/T 15288
Flammability corresponding to
Inlet plastic: UL 94 V-0
Fuseholder plastic: UL 94 V-0
MTBF @ Rated amb. Temp./Voltage (Mil-HB-
217F)
2,100,000 hours
Fuse holder
2 fuses (Ø5 x 20 mm) (certied to IEC 60127-6)
The FN 9262 power entry module combines an IEC
inlet, mains lter with very high lter attenuation
based on nano crystalline material selection and
fuses in a small form factor. Choosing FN 9262
product line brings you rapid availability of a standard
lter associated with the necessary safety
acceptances. Standard IEC connector lters are a
practical solution helping you to pass EMI system
approval in a short time. A wide selection on
amperage ratings, mounting possibilities and lters
for medical applications (acc. to IEC 60601-1 with low
leakage current and high performance) are designed
to offer you the desired solution.
Features and Benets
Exceptional conducted attenuation performance,
based on chokes with high saturation resistance
and excellent thermal behavior
B types comply with the requirements of IEC/EN
60601-1 (1MOPP) for creepage and clearance,
leakage current and high potential testing
Versions up to 10 A are available with fuse holder for
two fuses
Custom-specic versions are available on request
Typical applications
Medical electrical devices (MD) and In-Vitro
Diagnostic (IVD) medical devices
Portable electrical and electronic equipment
Small to medium-sized machines and household
equipment
Single-phase power supplies, switch-mode power
supplies
Test and measurement equipment
Typical electrical schematic
Approvals
High Performance Power Entry Module with Fuses
2 EMC/EMI Products
Schaffner Group Datasheets
18 Jun 2019