Datasheet

ManualsBrandsSchaffner ManualsFiltersPower Inlet with Filter 10 A 250 VAC

IEC inlet ﬁ lters

FN 9263

General purpose power entry module

with mains switch

Approvals■ Rated currents up to 10A

■ 1-pole rocker switch

■ Snap-in versions (S and S1 type)

■ Compact to ﬁ t 1U rack size

(CQC approval pending)

Typical applications

The FN 9263 power entry module combines

an IEC inlet, mains filter with excellent filter

attenuation and a mains switch in a small

form factor. Choosing the FN 9263 product

line brings you the rapid availability of a

standard filter associated with the necessary

safety acceptances. Standard IEC connector

filters are a practical solution helping you to

pass EMI system approval in a short time.

A wide selection on amperage ratings and

mounting possibilities are designed to offer

you the desired solution.

■ Exceptional conducted attenuation

performance, based on chokes with high

saturation resistance and excellent thermal

behavior.

■ Rear/front or snap-in mounting.

■ Small compact housing fitting 1U rack

applications.

■ Versions up to 10A are available with

1 pole rocker switch.

■ Custom-specific versions are available on

request.

■ Portable electrical and electronic

equipment

■ Small to medium-sized machines and

household equipment

■ Single-phase power supplies, switch-mode

power supplies

■ Test and measurement equipment

■ Rack mounting equipment

Features and benefits

Technical specifications

Maximum continuous operating voltage: 250VAC, 50/60Hz

Operating frequency: dc to 400Hz

Rated currents: 1 to 10A @ 40°C max.

High potential test voltage for capacitors: P –> E 2000VAC for 2 sec

P –> N 760VAC for 2 sec

Protection category: IP40 according to IEC 60529

Temperature range (operation and storage): -25°C to +85°C (25/85/21)

Design corresponding to: UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939

Flammability corresponding to: UL 94V-2, UL 94V-0 or better

MTBF @ 40°C/230V (Mil-HB-217F): 6,500,000 hours

Rocker switch description:

Function: 1-pole, dark not illuminated

Marking I - 0

Electrical specifications: Inrush current 78A

10,000 on-off operations according to UL 1054, TV 5

Switch ratings:

USA (UL): 10A, 125VAC; 8A, 250VAC; 1/4HP

Canada (CSA): 10A, 250VAC; 1/4HP

Europe (ENEC): 20A (4A), 250VAC*

China (CQC): 10A, 250VAC

Typical electrical schematic

Line

Switch

Cx R 2xL 2xCy

N‘

E‘

P‘

Load

* Value in () relates to the inductive current charge: cos γ = 0.65

Summary of content (3 pages)

PAGE 1
IEC inlet ﬁlters FN 9263 General purpose power entry module with mains switch ■ ■ ■ ■ Rated currents up to 10A 1-pole rocker switch Snap-in versions (S and S1 type) Compact to ﬁt 1U rack size Approvals (CQC approval pending) Technical specifications Maximum continuous operating voltage: Operating frequency: Rated currents: High potential test voltage for capacitors: Protection category: Temperature range (operation and storage): Design corresponding to: Flammability corresponding to: MTBF @ 40°C/230V (
PAGE 2
> Components > FN 9263 Filter selection table Filter FN FN FN FN FN FN FN * Rated current @ 40°C (25°C) Leakage current* @ 250VAC/50Hz Inductance L [A] 1 (1.2) 2 (2.3) 3 (3.5) 4 (4.6) 6 (6.9) 8 (9.2) 10 (11.5) [μA] 373 373 373 373 373 373 373 [mH] 5.3 2.7 2 1 0.3 0.25 0.2 9263x-1-06-y 9263x-2-06-y 9263x-3-06-y 9263x-4-06-y 9263x-6-06-y 9263x-8-06-y 9263x-10-06-y Capacitance Cx Cy [μF] 0.1 0.1 0.1 0.1 0.1 0.1 0.1 [nF] 2.2 2.2 2.2 2.2 2.2 2.2 2.
PAGE 3
> Components > FN 9263 Mechanical data FN 9263 FN 9263S B B 6.3 x 0.8 6.3 x 0.8 S A C F H A J E D F G I J E D I G FN 9263S1 Panel cut out B A N 6.3 x 0.8 R J E M C P G F D I Installation T Dimensions A B C D E F G H I J M N P R S T* T* T* * FN 9263 FN 9263S FN 9263S1 Tolerances 46 35 36 41 27.9 5.5 32.2 Ø3.3 13.8 12.5 R ≤ 3.5 33.2 29.2 M3 90° 34 35 34 35 ±0.3 41 27.9 5.5 32.2 41 27.9 5.5 32.2 ±0.3 +0.2/-0 ±0.3 +0/-0.2 ±0.1 13.8 12.5 R ≤ 3.5 32.6 29.0 13.8 12.