Datasheet

> Components > FN 9263
Filter selection table
FN 9263x-1-06-y 1 (1.2) 373 5.3 0.1 2.2 1000 -06 55
FN 9263x-2-06-y 2 (2.3) 373 2.7 0.1 2.2 1000 -06 55
FN 9263x-3-06-y 3 (3.5) 373 2 0.1 2.2 1000 -06 55
FN 9263x-4-06-y 4 (4.6) 373 1 0.1 2.2 1000 -06 55
FN 9263x-6-06-y 6 (6.9) 373 0.3 0.1 2.2 1000 -06 55
FN 9263x-8-06-y 8 (9.2) 373 0.25 0.1 2.2 1000 -06 55
FN 9263x-10-06-y 10 (11.5) 373 0.2 0.1 2.2 1000 -06 55
* Maximum leakage under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage could reach twice this level.
Filter Rated current Leakage current* Inductance Capacitance Resistance Output connections Weight
@ 40°C (25°C) @ 250VAC/50Hz L Cx Cy R
[A] [μA] [mH] [μF] [nF] [kΩ] [g]
Product selector
FN 9263x-yy-yy-y
Snap-in range for S version only
Blank: Snap-in range 0.6 to 1.5mm
20: Snap-in range 1.6 to 2.5mm
30: Snap-in range 2.6 to 3.5mm
06: Faston 6.3 x 0.8mm (spade/soldering)
1 to 10: Rated current
Blank: Standard housing with mounting fl anges
S: Snap-in version, snapper on vertical side
S1: Snap-in version, snapper on horizontal side
Per CISPR 17; A = 50Ω/50Ω sym; B = 50Ω/50Ω asym; C = 0.1Ω/100Ω sym; D = 100Ω/0.1Ω sym
Typical filter attenuation
1 to 4A types 6 to 10A types
For example: FN 9263-1-06, FN 9263S-10-06-20, FN 9263S1-6-06-30