Datasheet

ManualsBrandsSchaffner ManualsFiltersPower Inlet with Filter 10 A 250 VAC

DATASHEET

IEC Inlet Filters FN 9280

Ultra Compact and Versatile Filtered Power Entry Module

Single stage filter

Ultra compact design

Rated currents up to 10 A

dual-fuse holder

Fuses Ø5x20 mm

2-pole rocker switch

Good attenuation performance

Faston or spring cage terminals

Check the video of our IEC Inlet

Filters FN 9280 and FN 9290 on

Youtube!

Performance indicators

Technical specifications

Mechanical life

50,000 cycles

High potential test voltage

P –> PE 2000 VAC for 2 sec (standard types)

P –> PE 2500 VAC for 2 sec (B types)

P –> N 760 VAC for 2 sec

MTBF @ 40°C/230 V (Mil-HB-217F)

>1,000,000 hours

Temperature range (operation and storage)

– 25°C to +85°C (25/85/21)

Design corresponding to

UL 1283, CSA 22.2 No. 8 1986, EN 60939, EN 60950, EN

60601-1, UL 544, EN 60320

Flammability corresponding to

UL 94 V-2 or better

Maximum continuous operating voltage

250 VAC, 50/60 Hz

Rated currents

1 to 10 A @ 40°C max.

Operating frequency

DC to 400 Hz

Switch ratings

USA (UL) and Canada (C-UL)

10 A, 125 VAC; 10 A, 250 VAC; 1/3 HP

Europe (ENEC)

10 A (4 A), 250 VAC**

Electrical specifications

Inrush current 82 A

6,000 on-off operations according to UL 1054

10,000 on-off operations according to ENEC

Leakage current

Standard: <500 uA at 250 VAC/50 Hz

Medical: <5 uA at 250 VAC/50 Hz

Protection category

IP 40 according to IEC 60529 (front side)

Fuse holder

2 fuses (Ø5 x 20 mm) max. 250 V

Terminals

IP 20 spring cage safe against finger touch

Spring cage wire range

0.2 –1.5 mm2 / 24 –16 AWG single or flexible wire

Rocker switch

2-pole, dark not illuminated, Marking I - 0

* 10 A version is 8 A UL and CSA approved

** Value in () relates to the inductive current charge: cos γ = 0.65

Approvals

(CQC except HI-types; Patent US 20110227692/US

8766761; CN ZL201080069589.0)

Choosing FN 9280/90 product line brings you the

rapid availability of a standard filter associated with

the necessary safety acceptances and a high

attenuation performance. For higher attenuation

performance the FN 9290 family with a dual stage

filter and identical panel cut-out can be used.

Standard IEC connector filters are a practical solution

to pass EMI system approval in a short time. A wide

selection of amperage ratings, mounting possibilities

and also filters for medical applications are designed

to offer you the best solution.

Features and benefits

Good conducted attenuation performance, based

on chokes with high saturation resistance and

excellent thermal behavior

Deep-drawn iron-sheet housing for best possible

shielding against magnetic fields

Rear/front flange mounting or snap-in versions

Dual and additional spare fuse holder

2-pole rocker switch

Faston or spring cage terminals

Medical version (B Type) according IEC/EN 60601-1

All versions according IEC/EN 62368-1

Typical applications

Portable electrical and electronic equipment

Consumer goods

EDP and office equipment

Single-phase and switch-mode power supplies

Test and measurement equipment

Medical electrical devices (MD) and

In-Vitro

Diagnostics (IVD) equipment

Audio/Video, information and communication

technologies

Typical electrical schematic

Summary of content (8 pages)

PAGE 1
DATASHEET IEC Inlet Filters FN 9280 Ultra Compact and Versatile Filtered Power Entry Module Single stage filter Approvals Ultra compact design Rated currents up to 10 A dual-fuse holder Fuses Ø5x20 mm 2-pole rocker switch Good attenuation performance Faston or spring cage terminals Check the video of our IEC Inlet Filters FN 9280 and FN 9290 on Youtube! Performance indicators (CQC except HI-types; Patent US 20110227692/US 8766761; CN ZL201080069589.
PAGE 2
EMC/EMI Products Schaffner Group Datasheets 2017 Filter selection table Filter* Rated current Leakage current** @ 40°C @ 250 VAC /50 Hz Inductance Capacitance L1 Cx L2 Resistance R Output Weight connections (@ 120 VAC /60 Hz) [A] [mA] [nF] [kOhm] FN 9280-1-.. 1 0.31 (0.18) 10.9 [mH] 0 220 2.2 1000 -06 -100 101 FN 9280-2-.. 2 0.31 (0.18) 4.4 0 220 2.2 1000 -06 -100 102 FN 9280-4-.. 4 0.31 (0.18) 1.7 0 220 2.2 1000 -06 -100 105 FN 9280-6-.. 6 0.
PAGE 3
EMC/EMI Products Schaffner Group Datasheets 2017 Product selector All FN 9280/FN 9290 are equipped with a dual fuse holder with a spare fuse holder. Note: All FN 9280/FN 9280 B/FN 9289/FN 9289 B/FN 9290/FN 9290 B/FN 9299/FN 9299 B are stock types from our distribution partners. Order Examples: FN 9280 B-6-100: Medical version of single stage, dual fuse EMC/EMI filter, flange set for vertical/horizontal/front/rear mounting, 6 A, spring cage terminals, from stock available.
PAGE 4
EMC/EMI Products Schaffner Group Typical filter attenuation FN 9280 Series | Per CISPR 17; A=50 Ω/50 Ω sym; B=50 Ω/50 Ω asym 1 A types 2 A types 4 – 6 A types 10 A types 4 – 6 A types 10 A types 4 – 6 A types 10 A types 4 – 6 A types 10 A types FN 9280 B Series | Per CISPR 17; A=50 Ω/50 Ω sym; B=50 Ω/50 Ω asym 1 A types 2 A types FN 9280 E Series | Per CISPR 17; A=50 Ω/50 Ω sym; B=50 Ω/50 Ω asym 1 A types 2 A types FN 9280 EB Series | Per CISPR 17; A=50 Ω/50 Ω sym; B=50 Ω/50 Ω asym 1 A ty
PAGE 5
EMC/EMI Products Schaffner Group Mechanical Data FN 9280-x-06/FN 9280 B-x-06 FN 9280-X-100/FN 9280 B-X-100 FN 9289-x-06/FN 9289 B-x-06 FN 9280-X-100/FN 9280 B-X-100 Datasheets 2017
PAGE 6
EMC/EMI Products Schaffner Group Mechanical Data FN 9280 E-x-06/FN 9280 EB-x-06 FN 9280 E-x-100/FN 9280 EB-x-100 FN 9289 E-x-06/FN 9889 EB-x-06 FN 9289E-x-100 / FN 9289EB-x-100 Datasheets 2017
PAGE 7
EMC/EMI Products Schaffner Group Datasheets Assembly Instructions Terminal -100 clamping range, solid wire / flex wire 0,20 mm² –1,5 mm², AWG24 –AWG16 operating force of slider recommended stripped length max. 40 N 8 mm Push the knob above the terminal to insert the wire. Removal of the combined switch / fuse holder unit An additional fuse mark on the switch indicates the fuses holders behind the switch. The red frame shows the outline of the removable unit.
PAGE 8
EMC/EMI Products Schaffner Group Datasheets Headquarters, global innovation and development Sales and application centers Switzerland Schaffner Group Nordstrasse 11 4542 Luterbach T +41 32 681 66 26 info@schaffner.com http://www.schaffner.com China Schaffner EMC Ltd. Shanghai T20-3 C, No 565 Chuangye Road, Pudong district 201201 Shanghai T +86 21 3813 9500 cschina@schaffner.com http://www.schaffner.com.