Datasheet

5 EMC/EMI Products Schaffner Group Datasheets 2017
Assembly Instructions
Terminal -100
clamping range, solid wire / flex wire 0,20 mm² –1,5 mm², AWG24 –AWG16
operating force of slider max. 40 N
recommended stripped length 8 mm
Push the knob above
the terminal to insert
the wire.
Removal of the combined switch / fuse holder unit
An additional fuse mark on the switch indicates the fuses holders behind the
switch. The red frame shows the outline of the removable unit.
With a simple tool like a Swiss Army knife or a screwdriver No 1 or smaller the
unit (1) can be removed from the filter. On the topside (2) behind the switch
there are two fuse holders for each live connection. On the bottom side (3) is
a clip to carry an additional spare fuse.
Please visit www.schaffner.com to find more details on filter connectors.