Datasheet

Power Cord with Locking System
Approvals■ Locking system for standardized
IEC C14 inlet
■ No accidental disconnection
■ Rated current up to 10A (C13 plug)
■ Fits any SCHAFFNER IEC C14 inlet filter
■ Retrofit for any IEC C14 inlet
■ Various power line plugs for
international usage
Typical applications
■ Power cord with locking system for
IEC inlets
■ Protection class I
■ Suitable for use with any C14 IEC inlet
■ Fits the complete Schaffner IEC inlet filter
program with C14 IEC inlet
■ Max. pin temperature 70°C
■ Data centers
■ Industrial equipment
■ Medical devices
■ In-vitro diagnostic devices
■ Broadcasting stations
■ Mobile applications
Features and benefits
Technical specications
Maximum continuous operation voltage: 250VAC 50/60Hz
Rated current: 10A
High potential test voltage: P –> PE 2000VAC (1min 50Hz)
P –> N 2000VAC (1min 50Hz)
Protection category: IP20 according IEC 60529
Temperature range (operation and storage): -25°C to +70°C
Cable: 2m; 3 x 1.00mm
2
; H05 VV-F; 6 ft; 3 x 18AWG; SVT
black; other lengths or colors on request
Connector (load side): IEC C13 according to IEC/EN 60320-2-2 with IEC Lock
UL 498, CSA C22.2 no. 42 (for cold conditions) pin
temperature 70 °C, 10 A, Protection Class I
Connector (line side): IEC C14 according to IEC/EN 60320-2-2;
EU Schuko plug CEE7/VII; UK plug BS1363;
US NEMA5-15 plug; CH plug SEV 1011;
Other plugs on request
Flammability corresponding to: Plugs: UL94V-2 or better; Cable: IEC 60332-1 Cat. F2
Schaffner power cords with IEC lock guard
against accidental disconnection of all
electrical appliances with an IEC inlet. No
exchange or modification of the IEC inlet or
IEC inlet filter system is needed. Easy retrofit
for all electronic equipments and devices.
C13 C14 CEE7/VII NEMA5-15 BS1363 SEV 1011
70°C 70°C
IEC Inlet Locking System
IL 13
The locking system has a tensile force of typical 200N. It is recommended to use it with flange mount filters. For details refer to our
Application Note „Using IEC Lock Power Cords with IEC Inlets and Filters”