Specifications

11
Chapter 6
Settings
Settings for each mode are accessed by pressing
the yellow right arrow button at the bottom
of the transport screen. Some modes contain
multiple settings pages. To return to the
transport screen, press the yellow le arrow
button.
Pro Tools Mode
Screen Dim Timer:
is setting will determine how long the screen
will wait to go into low-brightness mode.
Touching the screen again will bring it back to
full brightness.
Surround Panner Link:
When panners are ‘linked,’ hitting Skillet’s Up
or Down buttons on either side of Skillet will
cause BOTH panners to track up/track down
(or le/right). By default this setting is ON.
When turned OFF, each panner may be focused
to seperate tracks.
Joystick Damping:
Defaults to Medium. When OFF, Joysticks
send their raw values. Oen in Pro Tools, this
can make it dicult to get to the corners of
the Surround Panner window - le front, right
front, le rear, etc - so three dierent levels of
‘damping’ may be chosen. Damping brings the
‘edges’ of the value range closer towards the
center, causing them to be easier to reach.
Surround Panner Z Control:
Allows for selecting which parameter the Z
(twist) axis of the joystick aects in surround
panner mode. is defaults to OFF, and has
options for Front Divergence, Rear Divergence,
Front/Rear Divergence, Combined (All)
Divergences, Center %, and LFE amount.
Surround Panner Z Mode:
By default, the Center point of the Z axis is 50%,
however in many instances this is unwanted.
Options include Center = 0% (twist clockwise to
raise the parameter, twisting counter-clockwise
past the center does nothing, parameter
rests at minimum) and Center = 100% (twist
counter clockwise to lower the parameter,
twisting clockwise past the center does nothing.
Parameter rests at ‘maximum’).
Skillet Glide Time:
In Plugin mode, Skillet can glide the current
playback values to your new input, beginning
from the moment you touch a joystick. Choose
how long that ramp lasts, or turn it o, here.
Glide time defaults to 150ms.
Atmos: Invert X
Defaults to ON. Due to a bug in Pro Tools, some
versions will inadvertently invert the X axis
(le is right, right is le, cats are dogs) in Dolby
Atmos. is setting allows for re-inverting the
X axis automatically, when an Atmos plugin is
recognized as linked.