Operation Manual

English - 68 -
Manual Tuning
HINT: This feature can be used for direct broadcast
entry.
You should select satellite before starting
manual search. Satellite settings menu is located in
the settings menu.
Select • Manual Channel Scan from the Installation
menu by using “ ”/“ ” and OK buttons. Manual
Scan options screen will be displayed.
Select the desired • Search Type using “
” or “
” button. Manual search options will change
accordingly. Use “ ”/“ ” button to highlight an item
and then press “ ” or “ ” button to set an option.
You can press “MENU” button to cancel.
Digital Aerial Manual Search
In manual channel scan, the number of the multiplex
or frequency are entered manually and only that
multiplex or frequency are searched for the channels.
After selecting search type as Digital Aerial, you can
enter the multiplex or frequency number using the
numeric buttons and press OK button to search.
Digital Cable Manual Search
In cable manual scan, you can enter frequency,
modulation, symbol rate and network channel scan
options. After selecting search type as Digital Cable,
you can set the desired options and press OK button
to search.
Satellite Manual Search
In satellite manual scan, you can enter frequency,
polarization, symbol rate, network channel scan
and satellite options. You can then press OK button
to search. When the channel is located, any new
channels that are not on the list will be stored.
Note: Frequency, polarization and symbol rate may
change in accordance with the selected channels.
Analogue Manual Search
After selecting search type as analogue, you can use
“ ”/“ ” button to highlight an item and then press “
” or “ ” button to set an option.
Enter the channel number or frequency using the
numeric buttons. You can then press OK button
to search. When the channel is located, any new
channels that are not on the list will be stored.
Network Channel Scan
Select Network Channel Scan from the installation
menu by using “ ” or “ ” and OK buttons. Network
Channel Scan selection screen will be displayed.
Select Digital Aerial or Digital Cable and press
OK button to continue. The following message will
be asked. Select Yes to continue or select No to
cancel.
A02_[GB]_MB70_5112UK_DVBT_C_S2_26884W_GOLD11_10071641_50194323.indd 68A02_[GB]_MB70_5112UK_DVBT_C_S2_26884W_GOLD11_10071641_50194323.indd 68 13.02.2012 17:23:3313.02.2012 17:23:33