Operation Manual

EN | 19

unit to listen to the sound of that device through the amplier of this music system.

1. Switch the unit on and select the AUX mode by pressing the Source button repeatedly. “AUX” will

be shown in the display.

2. To connect the external device please use a standard stereo audio cable (3.5 mm to 3.5 mm

plugs) (not included) to connect the headphone out or audio line out of the external device to the

AUX input socket of this unit.

3. Switch the external device (e.g. MP3 player) on.

4. Start playback of the external device and adjust the volume of BB 320 and the connected device

to the desired level.

5. Remember to switch off the unit when you are nished using the external device.

Headphone Connector

A headphone jack is located at rear of the unit. When the unit is powered on and playing music, you

can connect the earphones (not included) to the headphone jack for your private listening. Mind the

safety information from page 12 on.

With headphones connected the unit’s speakers are disabled. To listen via the speakers again, discon-

nect the headphones.

Specications

Power Supply: DC 9V 1.0A (external adaptor)

Batteries: DC 9V (6x 1.5V (UM-2/C size, not included)

Radio Frequency Range: FM 87.5 - 108 MHz

Dimensions (WxDxH) ca.: 232 x 227 x 112,5 mm

Technical specications and design may change without notice.