Manualshelf

Operation Manual

ManualsBrandsSchaub Lorenz ManualsAudioDAB 402
15161718192021222324
EN
EN | 21
Scan Setting
This function enables you to search only for stations with strong reception or for all stations
during automatic tuning.
1. During FM mode, press and hold the MENU/INFO button for 2 seconds to enter the
menu and then press the TUN/CH▲ or TUN/CH▼ button to select “Scan setting”. Finally
press the SELECT button to conrm.
2. Press the TUN/CH▲ or TUN/CH▼ button to select “Strong stations”. Press the SELECT
button to conrm the setting. With this setting active, only strong stations will be found
during automatic tuning.
To nd all stations, also those with inferior reception, select “All stations”.
Audio Setting
1. During FM mode, press and hold the MENU/INFO button for 2 seconds to enter the
menu and then press the TUN/CH▲ or TUN/CH▼ button to select “Audio setting”. Finally
press the SELECT button to conrm.
2. Press the TUN/CH▲ or TUN/CH▼ button to select between “Stereo allowed” and
“Forced mono”. Press the SELECT button to conrm the setting.
Note:
• The radio will automatically switch between stereo and mono mode, but you can override
this and switch this function manually which is helpful for poor signal reception.
FM Display Modes
Every time you press the MENU/INFO button, the display will cycle through the following display
modes:
RDS Radio Text, Programme Type, Frequency, Mono/Stereo, Power status (Mains/Battery),
Time and Date.
Storing and Recalling Stored Stations
This function allows up to 10 stations to be programmed into the memory and stored in both
DAB and FM mode.
1. To store a preset, rst tune to your desired station, then press and hold the PRESET but-
ton for 2 seconds. The display will show the preset store number (F.8).
2. Press the TUN/CH▲ or TUN/CH▼ button to select your desired station preset number.
3. Press the SELECT button to conrm your selection. The station currently broadcasting
has now been stored in the selected location (F.9).
4. To select a preset station, rst press the
PRESET button once and then press the TUN/
CH▲ or TUN/CH▼ button to scroll up or down
the presets that you have stored, and press the
SELECT button to conrm. The station name
or frequency and preset location number will