DE EN Bedienungsanleitung User Manual DAB 412
DE Vorwort Vielen Dank, dass Sie sich für dieses Produkt entschieden haben. Bitte lesen Sie diese Bedienungsanleitung sorgfältig, damit Sie in der Lage sind, die maximale Leistungsfähigkeit dessen auszuschöpfen und die Sicherheit bei Installation, Verwendung und Wartung gewährleistet wird. Bewahren Sie diese Bedienungsanleitung so auf, dass Sie sie immer griffbereit haben. Unsere Hotline für technische Fragen: 0900/1000036 (Mo. – Do.: 8.00 – 16.30 Uhr | Fr.: 8.00 – 15.00 Uhr | 0,99 €/Min.
Sicherheitshinweise 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 4 | DE Bedienungsanleitung lesen – Lesen Sie die Bedienungsanleitung aufmerksam, um sich mit der Bedienung des Gerätes vertraut zu machen. Bedienungsanleitung aufbewahren – Bewahren Sie die Bedienungsanleitung sorgfältig auf. Hinweise beachten – Beachten Sie alle Hinweise und Anweisungen in der Bedienungsanleitung. Wasser und Feuchtigkeit – Das Gerät darf nicht in der Nähe von Wasser (z. B.
DE 16. 17. 18. 19. 20. 21. personal durchgeführt werden. Versuchen Sie niemals, das Gerät selbst zu reparieren. Öffnen Sie niemals das Gehäuse. Offenes Feuer – Halten Sie das Gerät fern von offenem Feuer. Stellen Sie keine brennenden Kerzen oder ähnliches auf das Gerät. Gewitter – Während eines Gewitters sollten Sie den Netzstecker ziehen.
Bedienelemente 13 18 1 2 3 4 7 8 9 5 10 6 11 16 12 17 1. 2. 3. 4. 5. 6. Display Taste MODE Taste STANDBY Taste INFO Lautstärkeregler VOLUME+/Taste PRESET 7. 8. 9. 10. 11. 12. 14 15 Taste MENU Taste ALARM/SNOOZE Taste SELECT SCROLL-Rad Taste SLEEP Lautsprecher 13. 14. 15. 16. 17. 18. Typenschild Antenne Netzadapteranschluss Kopfhöreranschluss Batteriefach Netzadapter Stromversorgung Netzadapter 1A. 1. Die Stromaufnahme des Gerätes beträgt DC 6V 2.
DE Hinweise: • Verwenden Sie keine unterschiedlichen Batterien. • Wenn das Gerät mit Batterien betrieben wird, trennen Sie es zuvor vom Stromnetz. Grundfunktionen Ein- & Ausschalten des Gerätes 1. Versorgen Sie das Gerät mit Strom wie oben beschrieben. 2. Das Gerät befindet sich nun im Standby-Modus. 3. Schalten Sie das Gerät ein, indem Sie die Taste STANDBY drücken. 4. Um das Gerät in den Standby-Modus auszuschalten, drücken Sie erneut die Taste STANDBY .
Hinweis: • Aktuelle Einstellungen oder Standardwerte sind im Menü durch ein Sternchen (*) an der oberen Zeile rechts gekennzeichnet. Uhrzeiteinstellung Die Uhrzeit in diesem Radio synchronisiert sich automatisch über das DAB- oder RDS-Signal. Wenn das Radio eingeschaltet und ein DAB-Sender empfangen wird, stellt sich die Uhrzeit entsprechend automatisch ein. Dies kann bis zu 1 - 2 Minuten dauern. Wenn in der Region weder DAB- noch FM-RDS-Empfang besteht, ist es notwendig, die Uhrzeit manuell einzustellen.
DE Manuelle Einstellung der Uhrzeit im Betrieb: 1. Versorgen Sie das Gerät mit Strom wie oben beschrieben und drücken SIe die Taste STANDBY , um das Radio einzuschalten. 2. Drücken Sie die Taste MENU und drehen Sie das SCROLL-Rad, bis „System“ im Display angezeigt wird. Drücken Sie die Taste SELECT, um das Untermenü zu öffnen. 3. Drehen Sie das SCROLL-Rad, um den Menüpunkt „Time“ auszuwählen und drücken Sie SELECT.
können Sie die gefundenen Sender durchsuchen. Um einen beliebigen Sender wiederzugeben, drücken Sie die Taste SELECT wenn der Sendername angezeigt wird. DAB Manuelle Sendersuche 1. Um manuell nach Sendern zu suchen, öffnen Sie zunächst das Menü, indem Sie im Betrieb die Taste MENU drücken. Wählen Sie dann anhand des SCROLL-Rads den Menüpunkt „Manual tune” (Abb. F.4) und drücken Sie SELECT, um das Menü zu öffnen. 2.
DE FM-Radio 1. 2. 3. 4. Drücken Sie die Taste STANDBY , um das Gerät einzuschalten. Drücken Sie die Taste MODE, um in den FM-Modus zu schalten. Im Display wird „FM“ und die Frequenz angezeigt. Um automatisch nach dem nächsten verfügbaren Radiosender zu suchen, halten Sie das SCROLL-Rad 2 Sekunden lang gedreht. Im Display wird „Scanning...” angezeigt und der nächste gefundene Sender wird gespielt (Abb. F.6). Um manuell nach einem Sender zu suchen, drehen Sie das SCROLL-Rad.
Radio-Text, Programmtyp, Frequenz, Audioart, Betriebsart (Netzbetrieb/Batterie), Zeit und Datum: Radio-Text Zeigt Informationen zum aktuellen Programm. Programmtyp Beschreibt den „Stil“ oder das „Genre“ des übertragenen Programms. Frequenz Zeigt die Frequenz des aktuellen Senders an, z. B. „87,8MHz”. Audioart Zeigt an, ob der aktuelle Sender in Mono oder Stereo überträgt. Betriebsart Zeigt die Betriebsart (Netzoder Batteriebetrieb) an.
DE Wecker, Snooze und Sleep Wecker einstellen 1. Die Weckfunktion ist nur bei Netzbetrieb möglich. Bei Batteriebetrieb schaltet sich das Gerät ganz aus und nicht in Standby, daher ist bei Batteriebetrieb keine Weckfunktion möglich. 2. Ein aktiver Wecker wird durch das Weckersymbol im Display oben rechts angezeigt. 3. Wecker können im Standby-Betrieb ein- oder ausgeschaltet werden. Die Weckerparameter können nur im Betrieb (DAB+ oder FM-Modus) eingestellt werden. 4.
• Um die Einstellung zu speichern, drücken Sie die Taste SELECT. Snooze-Funktion 1. Um einen aktiven Wecker hinauszuzögern, drücken Sie währenddessen einmal die Taste ALARM/SNOOZE. Sie können dann die gewünschte Snooze-Dauer auswählen, indem Sie wiederholt die Taste ALARM/SNOOZE drücken. Einstellbare Snooze-Dauer sind 5 oder 10 Minuten für Buzzer und 5, 10, 15 oder 30 Minuten für Radiomodus.
DE 3. 4. 5. SCROLL-Rads den Menüpunkt „System” und drücken Sie SELECT, um das Untermenü zu öffnen. Wählen Sie anhand des SCROLL-Rads die Option „” und drücken dann SELECT, um das Untermenü zu öffnen (Abb. F.15). Im Display wird nun „Factory Reset Yes” angezeigt. Wählen Sie anhand des SCROLL-Rads die Option „” und drücken dann SELECT, um den Reset durchzuführen (Abb. F.16). Im Display wird „Restarting….” angezeigt.
Safety Information 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. Retain Instructions - The safety and operating instructions should be retained for future reference. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. Water and Moisture – Do not use the apparatus near water (e.g.
19. 20. 21. ensure that the apparatus is working properly and safely. Batteries – Always place batteries in the correct polarization into electrical components. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Do not mix old and new batteries. Take attention to the environmental aspects of battery disposal. Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. Remove batteries before disposing of the product.
Product Overview 13 18 1 2 3 4 7 8 9 5 10 6 11 16 12 17 1. 2. 3. 4. 5. 6. Display MODE button STANDBY button INFO button VOLUME+/- control PRESET button 7. 8. 9. 10. 11. 12. 14 15 MENU button ALARM/SNOOZE button SELECT button SCROLL control SLEEP button Speaker 13. 14. 15. 16. 17. 18. Rating label Antenna DC Input socket Headphone jack Battery door AC/DC Adaptor Power Supply Power Adaptor 1. The unit requires DC 6V 1A. 2.
Note: • Use batteries of the same type. Never use different types of batteries together. • To use the appliance with batteries, disconnect the power adaptor from it. EN Basic Functions Switching the Unit On & Off 1. Power the unit as described above. 2. The unit is now in standby mode. 3. To switch the unit on, press the STANDBY button once. 4. To switch the unit off into standby mode, press the STANDBY button again.
Clock Setting The clock in this radio is equipped to receive a DAB radio frequency and RDS time signal. After the unit has been turned on, it will automatically tune into a DAB radio station (see below) and update the clock. It may be necessary to wait for 1-2 minutes to allow the unit to receive the time signal. If there is no DAB or FM-RDS reception it will be necessary to manually set the clock. To manually set the clock in standby mode: 1. Power the unit as described above. 2.
2. 3. 4. 5. 6. 7. Press the MENU button, rotate the SCROLL control to until the display shows “System”, then press the SELECT button confirm. Continue rotating the SCROLL control until the display shows “Time” and then press the SELECT button to open the sub-menu. Scroll to “” and press the SELECT button again to enter the time setting. The hour digits will flash in the display. Rotate the SCROLL controll to set the correct hour, then press the SELECT button to confirm.
2. 3. Rotate the SCROLL control to move through the DAB channels, the display will show “5A to 13F” and their associated frequencies (F.5). When your desired frequency appears in the display, press the SELECT button to listen, the name of the station group (ensemble/multiplex) will be displayed. Prune You can remove all unavailable stations from the list: 1. In DAB mode press the MENU button to enter the menu, then rotate the SCROLL control to select “Prune” and finally press the SELECT button to confirm.
FM Radio 1. 2. 3. 4. EN Press the STANDBY button to switch on the radio. Press the MODE button to switch to FM mode. The display will show “FM” and the frequency. To automatically search for the next available radio station, rotate and hold for 2 seconds the SCROLL control. The display will show “Scanning...” and it will stop automatically once a station has been found (F.6). To manually search for a station, rotate the SCROLL control repeatedly. Each press adjusts the frequency by 0.05 MHz.
Radio Text This displays the information about the current programme. Programme Type This describes the “style” or “genre” of the programme that is being broadcast. Frequency This displays the frequency of the present station, such as “87.8MHz”. Audio Type This displays if the station being received is in mono or stereo. Power status Displays the power supply - adaptor or battery. If the power supply is battery, the display will show the battery capacity (21-100).
4. 5. 6. 7. 8. • • only be set when the product is on. To set or change alarm 1, press the ALARM/SNOOZE button once while the unit is in DAB+ or FM mode, then press the SELECT button (F.10). To set or change alarm 2, press the ALARM/SNOOZE button twice, then press the SELECT button. To exit the alarm setting mode, press the ALARM/SNOOZE button again. The alarm setup prompts you for the following parameters.
2. F.13). Press the STANDBY standby. button to fully cancel a sounding alarm and switch the ratio to Sleep Function To set the sleep timer while the radio is playing: 1. Press the SLEEP button once. You can choose the sleep delay time from: Sleep Off/10/20/30/60/70/80/90 minutes (F.14). Rotate the SCROLL control to cycle through the options or press the SLEEP button repeatedly, then press the SELECT button to choose the displayed option. 2. 3. 4.
Headphone Jack EN A headphone jack is located at the back of the unit. When the unit is powered on and playing music, you can connect earphones (not included) to the headphone jack for your private listening. Mind the safety information from page 16 on. With headphones connected the unit’s speaker is disabled. To listen via the speaker again, disconnect the headphones. Technical Specifications Rated Voltage (adaptor): Adaptor Output: Batteries: Radio Frequency Range: Dimensions (WxDxH) ca.
Ansprechpartner für dieses SchaubLorenz-Produkt: Contact for this SchaubLorenz product: Karcher AG Gewerbestr. 19 75217 Birkenfeld Germany www.karcher-products.