Operation Manual

EN | 21

2. Press the MENU button, rotate the SCROLL control to until the display shows “System”,

then press the SELECT button conrm.

3. Continue rotating the SCROLL control until the display shows “Time” and then press

the SELECT button to open the sub-menu. Scroll to “<Set Time /Date>” and press the

SELECT button again to enter the time setting.

4. The hour digits will ash in the display. Rotate the SCROLL controll to set the correct

hour, then press the SELECT button to conrm.

5. The minute digits will now ash. Rotate the SCROLL control to set the correct minutes,

then press the SELECT button to conrm.

6. You are now asked to set the date. Rotate the SCROLL control to set day, month and

year, pressing SELECT after each setting to conrm. “Time Saved” will be shown in the

display.

7. Exit the menu by repeatedly pressing the MENU button.

DAB+ Radio

First Use and Operation

• Press the STANDBY button to turn the radio on. When switching the radio on for the

rst time it will automatically enter DAB+ mode and perform the auto scan function to

search for available radio stations.

• During the scan the display shows “Scanning...” together with a slide bar that indicates

the progress of the scan and the number of stations that have been found so far (F.2).

• Once the scan is nished the radio will select and play the rst alphanumerically found

station.

• You can now rotate the SCROLL control to explore the found stations followed by press-

ing the SELECT button to play the selected station.

Note:

• If there are no stations found after auto scan, the radio will display “Full Scan”. You can

now rotate the SCROLL control to select “Manual tune” or “Full scan” for stations, and

press SELECT button to conrm.

DAB Auto Scan

The auto scan will search for the entire DAB Band III channels. After the scan has nished, the

rst alphanumerically found stations will be automatically selected.

1. To activate auto scan, press the MENU button to enter the menu and then rotate the

SCROLL control to select “Full scan”. Press the SELECT button to conrm. The display

will show “Scanning…” and a slide bar (F.3).

2. All stations that have been found will be stored automatically. To explore the stations that

have been found, rotate the SCROLL control and when you nd a station that you would

like to listen to, press the SELECT button.

DAB Manual Tuning

1. To select manual tune, press MENU button to enter the menu, then rotate the SCROLL

control to select “Manual tune” (F.4) and press SELECT to enter the function.