Operation Manual
26 | EN
F.13).
2. Press the STANDBY button to fully cancel a sounding alarm and switch the ratio to
standby.
Sleep Function
To set the sleep timer while the radio is playing:
1. Press the SLEEP button once. You can choose the sleep delay time from:
Sleep Off/10/20/30/60/70/80/90 minutes (F.14).
Rotate the SCROLL control to cycle through the options or press the SLEEP button
repeatedly, then press the SELECT button to choose the displayed option.
2. Once you select a sleep delay period, the display returns to now playing screening. After
the sleep delay period the radio switches to standby mode.
3. To check the sleep interval remaining, briey press the SLEEP button and the interval
remaining will be shown in the display.
4. To cancel the sleep timer, press the SLEEP button repeatedly until “Sleep off” appears
in the display.
Factory Reset
If moving the radio to another location in the country the pre-tuned and stored DAB stations may
no longer be available and it will be necessary to reset the radio back to the factory settings.
1. Press STANDBY
to turn the radio on.
2. Press the MENU button to enter the menu, then rotate the SCROLL control to select
“System”. Press the SELECT button to enter the system menu.
3. Rotate the SCROLL control to select “<Factory Reset>”. Press the SELECT button to
conrm (F.15).
4. The display now shows “Factory Reset <No> Yes”. Rotate the SCROLL control to select
“<Yes>” and then press the SELECT button again (F.16) to do the factory reset.
5. The radio will display “Restarting….” and will then go into standby mode.
Note:
• All stored programmed stations will be lost during reset.