Operation Manual

EN | 25
EN
device is still connected to the player.
• If the connection is lost, follow the instructions above to pair your device to the player again.
Listen to Music from Bluetooth
®
Device
• If the connected Bluetooth
®
device supports Advanced Audio Distribution Prole (A2DP), you can
listen to the music stored on the device through the player.
• If the device also supports Audio Video Remote Control Prole (AVRCP), you can use the
player’s remote control to play music stored on the device:
1. Pair your device with the player as described above.
2. Play music via your device.
3. Use supplied remote control to control play:
- To pause/resume play, press the button.
- To skip to a track, press the / buttons.
- Increase and decrease the volume using the VOL+ and VOL- buttons on the unit or remote con-
trol and using the volume controls on your device.
Note:
• If there is no playback, ensure that neither the unit nor your Bluetooth
®
device are set to zero
volume and the right device for playback is paired.
Additional Guidelines for Bluetooth
®
Devices
• The short wave radio signals of a Bluetooth
®
device may impair the operation of other electronic
and medical devices.
• Switch off the device where it is prohibited.
Compatibility Disclaimer
• Wireless performance is dependent on your device’s Bluetooth
®
wireless technology. Refer to
your device’s user manual.
• The manufacturer cannot be held liable for any loss or leakage of or damage to data.
Troubleshooting
If there should be any problem with this product, please try to solve it with the help of the following
information before contacting service. Most problems can be solved easily.
No power
• Ensure that the AC cord of the apparatus is properly connected.
• Ensure that there is power at the AC outlet.
• Press / SOURCE button to turn the unit on.
Remote control does not work
• Reduce the distance between the remote control and the unit.
• Insert the battery with its polarities (+/-) aligned as indicated.
• Replace the battery.
• Aim the remote control directly at the sensor on the front of the unit.
No response from the unit
• Disconnect and reconnect the AC power plug, then turn the unit on again.
I can’t nd the Bluetooth
®
name of this unit on my Bluetooth
®
device for pairing
• Ensure the Bluetooth
®
function is activated on your Bluetooth
®
device.
• Ensure you have paired the unit with your Bluetooth
®
device.
No connection between the main unit and the subwoofer
• Ensure that the mains cables of the main unit and the subwoofer are both connected securely to