Instructions

www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
26
|
GB
2. -
der running water.
3.  -
take cage and reconnect the intake
cage to the equipment.
Store the device and its accessories in a
dark, dry and frost-proof place that is in-
accessible to children. The optimum stor-

Cover the electrical tool in order to pro-
tect it from dust and moisture.Store the
operating manual with the electrical tool.
Maintenance
The pump is largely maintenance-free.
However, we recommend regular inspec-
tions and care for a long service life.
Connections and repairs
Connections and repairs of electrical
equipment may only be carried out by an
electrician.
Please provide the following informa-
tion in the event of any enquiries:
Type of current for the motor
Machine data - type plate
Motor data - type plate
Service information
Please note that the following parts of
this product are subject to normal or nat-
ural wear and that the following parts are
therefore also required for use as con-
sumables.
Wear parts*: Seals
* Not necessarily included in the scope of
delivery!
10. Cleaning, maintenance
and storage
Cleaning
Attention!
Always unplug the power cord before
cleaning.
General cleaning instructions
In case of transport for utilization in
󰀨     
cleaned with clear water after every
use.
In case of stationary installation, the
  
checked regularly (at the latest every
three months).
󰀨
particles which are possibly present in
the pump casing
Regularly remove sludge from the pit
base (at the latest every 3 months) and
also clean the shaft walls

with clear water,
In the case of a long period of non-use,
the pump must be thoroughly cleaned
after the last use and before the new
  󰀩   
arise due to precipitation and residues.
Cleaning the lter (Fig. 7 - 9)
In order to protect the equipment and the
impeller from severe soiling, an addition-
       
intake cage. Please proceed as follows

1. Gently press the lateral tab in the di-
rection of the arrow until the intake
cage (5) can be disconnected from the
pump.