Instructions
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB
|
29
• In the case of a long period of non-use,
the pump must be thoroughly cleaned
after the last use and before the new
arise due to precipitation and residues.
Cleaning the impeller wheel
If the impeller wheel is dirty or blocked,
you can clean it via the pump connection
1. Screw the pump connection angle (6)
2. Remove the screws at the bottom of
3. Clean the impeller wheel with clear
water.
4. The re-assembly takes place in re-
verse order.
Store the device and its accessories in a
dark, dry and frost-proof place that is in-
accessible to children. The optimum stor-
Cover the electrical tool in order to pro-
tect it from dust and moisture.Store the
operating manual with the electrical tool.
Maintenance
The pump is largely maintenance-free.
However, we recommend regular inspec-
tions and care for a long service life.
Connections and repairs
Connections and repairs of electrical
equipment may only be carried out by an
electrician.
Please provide the following informa-
tion in the event of any enquiries:
• Type of current for the motor
• Machine data - type plate
• Machine data - type plate
Service information
Please note that the following parts of
this product are subject to normal or nat-
ural wear and that the following parts are
therefore also required for use as con-
sumables.
* Not necessarily included in the scope of
delivery!
11. Transport
Use only the transport handle (1) for trans-
porting the device.
12. Disposal and recycling
The equipment is supplied in packaging
to prevent it from being damaged in tran-
sit. The raw materials in this packaging
can be reused or recycled. The equip-
ment and its accessories are made of
various types of material, such as metal
and plastic.
Defective components must be disposed
of as special waste. Ask your dealer or
your local council.