Specifications

ManualsBrandsScheu Products Company ManualsElectric Heater80C/SPC-80C

STOP

QUESTIONS?

MISSING / DAMAGED PARTS

Please do not return this product to the store.

If a part is damaged or missing, simply e-mail us at

php@allpro-heaters.com, or visit our website at

http://allpro-heaters.com, or call our Customer

Service Department at (888) 619-7060.

We will be happy to assist you!

You can register your heater on line at

http://allpro-heaters.com/warranty.

OWNERS MANUAL

CONVECTION CONSTRUCTION HEATERS

Models

80C/SPC-80C 200C/SPC-200C

RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE

TABLE OF CONTENTS

HEATER SPECIFICATIONS................................................................................................................ 2

WARNINGS .................................................................................................................................. 2

OPERATING PRECAUTIONS ............................................................................................................. 3

SAFETY PRECAUTIONS .................................................................................................................... 3

ODOR FADE WARNING ...................................................................................................................... 4

CAUTION: SHELL EXTENSION INSTRUCTIONS. ........................................................................... 5

OPERATING INSTRUCTIONS ............................................................................................................ 6

SERVICING ......................................................................................................................................... 6

SIZE AND CAPACITY OF PROPANE CYLINDERS REQUIRED........................................................ 7

80C/SPC-80C - PARTS ....................................................................................................................... 8

200C/SPC-200C - PARTS ................................................................................................................... 9

WARRANTY....................................................................................................................................... 10

INSTRUCTIONS FOR ORDERING PARTS ...................................................................................... 10

SERVICE CENTERS ........................................................................................................................ 10

WARRANTY REGISTRATION ............................................................................................................11

Summary of content (12 pages)

PAGE 1
OWNERS MANUAL CONVECTION CONSTRUCTION HEATERS Models 80C/SPC-80C 200C/SPC-200C QUESTIONS? MISSING / DAMAGED PARTS STOP Please do not return this product to the store. If a part is damaged or missing, simply e-mail us at php@allpro-heaters.com, or visit our website at http://allpro-heaters.com, or call our Customer Service Department at (888) 619-7060. We will be happy to assist you! You can register your heater on line at http://allpro-heaters.com/warranty. TABLE OF CONTENTS HEATER SPECIFICATIONS.......
PAGE 2
Models 80C/SPC-80C, 200C/SPC-200C HEATER SPECIFICATIONS Type of Gas: For use with Propane Only Gas Supply Pressure to regulator Maximum: Bottle Pressure Minimum: 80C-/SPC-80C = 5 psig (34.5 kPa) Minimum: 200C series = 15 psig (103 kPa) regulator out 80C/SPC-80C = 11" W.C. (2.74 kPa) 200C series = 10 psig (68.9 kPa) Ignition: Piezo Ignitor (200C/SPC-200C is manual) Minimum Ambient Temp. Rating 0°F (-17.8°C) Model: 80C SERIES 200C SERIES Rating: 30,000 - 80,000 Btu/hr (8.79 - 23.
PAGE 3
Models 80C/SPC-80C, 200C/SPC-200C OPERATING PRECAUTIONS This is a propane, direct-fired, convection heater. It's intended use is primarily temporary heating of buildings under construction, alteration or repair. Propane is heavier than air. If propane leaks from a connection or fitting, it sinks to the floor, collecting there with the surrounding air, forming a potentially explosive mixture. Obviously, propane leaks should be avoided, so set up the propane supply with utmost care.
PAGE 4
Models 80C/SPC-80C, 200C/SPC-200C ODOR FADE WARNING WARNING Asphyxiation Hazard • Do not use this heater for heating human living quarters. • Do not use in unventilated areas. • The flow of combustion and ventilation air must not be obstructed. • Proper ventilation air must be provided to support the combustion air requirements of the heater being used.
PAGE 5
Models 80C/SPC-80C, 200C/SPC-200C CAUTION: NEVER IGNITE AND / OR RUN THIS HEATER UNLESS THE SHELLS ARE FULLY EXTENDED AND LOCKED INTO POSITION. STEP 1: HEATER AS RECEIVED OUT OF BOX. BEFORE LIFTING OUTER SHELL PROTECT HANDS. NEVER GRASP BARE METAL WITHOUT HAND PROTECTION. STEP 2: LIFT OUTER SHELL STRAIGHT UP. CARE MUST BE TAKEN TO PROTECT HANDS DURING LIFT. MAKE SURE CLIP GOES INTO SLOT IN LOWER SHELL. 3 PLACES STEP 3: LIFT OUTER SHELL UNTILALL THREE CLIPS INGAGE SLOTS IN LOWER SHELL.
PAGE 6
Models 80C/SPC-80C, 200C/SPC-200C OPERATING INSTRUCTIONS SERVICING PREPARING FOR OPERATION 1. Extend the shell fully and lock into place as shown in the enclosed instructions sheet before lighting or operating the heater. 2.Check the heater for possible shipping damage. If any is found, immediately notify the factory. 3. Follow all of the Safety and Operating Precautions. 4.
PAGE 7
Models 80C/SPC-80C, 200C/SPC-200C SIZE AND CAPACITY OF PROPANE CYLINDERS REQUIRED The charts below show the approximate size of the cylinder required for these heaters. To use the chart: 1. 2. 3. Select the lowest air temperature expected (at the bottom of the chart). Move straight up to time of operation desired (left side of chart). Read the cylinder size required.
PAGE 8
0C/SPC-80C PARTS Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 * * * 80C 8634 6152 8635 8636 8637 8638 2239 8639 8640 8641 8642 4223 6045 6104 6137 6138 8643 6433 6568 8018 8761 Description Pilot LP Ass'y Hose Ass'y Burner Ring Ring Shield Fuel Tube Ass'y Pilot Tube Ass'y Upper Shell Orifice Adapter Bracket, Pilot Mounting Orifice, LP Base Cap Clip, TC TE Valve Ftg., Elbow Female 1/4 FLRx1/8 FPT Ftg.
PAGE 9
200C/SPC-200C - PARTS Item Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 8645 1591 8635 8636 8637 8638 2240 8639 8640 8646 8642 4223 6045 6104 6137 6138 8643 6252 6256 Description Qty. Pilot LP Assemby Hose Ass'y, LP Burner Ring Assembly Ring Shield Fuel Tube Assembly Pilot Tube Assembly Upper Shell Orifice Adapter Bracket, Pilot Mounting Orifice, LP Base Cap Clip, TC TE VAlve Ftg., Elbor Female 1/4 FLRx1/8 FPT Ftg.
PAGE 10
Models 80C/SPC-80C, 200C/SPC-200C WARRANTY We are pleased that you have selected our product and take this opportunity to assure you that qualified service facilities are available if required. With the cooperation of independent dealers, a nationwide network of authorized servicing dealers is available for your servicing requirements. Should your product require servicing, read the section of the manual entitled “Servicing”.
PAGE 11
Hand print only. Use black or blue ink pen to fill in this form. Cross or check inside the circle.
PAGE 12
SCHEU PRODUCTS COMPANY, INC ATTN: MARKETING DEPARTMENT 8855 BAKER AVENUE RANCHO CUCAMONGA, CA 91730 Visit our website for product information, technical support, customer service, and warranty registration at: WWW.ALLPRO-HEATERS.COM for All-Pro products or WWW.UNVERISAL-HEATERS.COM for Universal products.