Item Brochure

SP-260
SP-250
BREATHTAKING PERFORMANCE
ECG and spirometry in one unit – this
is unique world-wide! The CARDIOVIT
AT-10 plus can be transformed into a
proven table spirometer for the meas-
urement, recording and assessment
of the ow-volume and volume-time
curves and the corresponding pa-
rameters. Several expiratory and in-
spiratory tests can be performed and
compared with country specic nor-
mal values. Pre/post measurements
and interpretation are standard. Two
ow sensors are available for the port-
able all-rounder. You decide whether
you prefer working with the proven
pneumotachograph SP-250 or SP-
260.
SPIROVIT SP-250, with Disposable
Sensor
The SP-250 ow sensor sets a new hy-
giene standard, reducing the risk of
cross contamination to its minimum. It
is small, lightweight, inexpensive and
easy to operate. You are ready for
the next test within seconds. Insert the
new sensor – done. Safe and conven-
ient for you and your patients.
SPIROVIT SP-260, Reusable Sensor
The Sensor can easily be disassem-
bled to clean the parts. It is reassem-
bled and ready for the next patient
in no time.
SPIROMETRY
THE FLEXIBLE QUICK-CHANGE
ARTIST!
Spirometry:
Measured values:
Slow spirometry: SVC
in, SVCex, SVCmax, ERV, IC, IRV ...
Forced Spirometry: FVC, FEV
1, FEV6, FEV1/FVC, FEV1/FEV6,
FEF
25-75%, PEF, MEF75%, MEF50%, MEF25%, FEF25%, FEF50%, FEF75%, FEF0.2-1.2,
FMFT, FIVC, PIF ...
MVV: MVV, RR, TV
Presentation:
- Flow/volume loop
- Flow/loop curve
- Volume/time curve
- Measurements table
- Interpretation programs
Predicted values (standard values):
- Adults: ECCS, Forche97, Berglund, Finnland, Indien, Han-
kinson (NHANES III), Knudson/ITS, Knudson76/ITS, Crapo 1981,
Morris/ITS, Composite, Polgar
- Paediatric: Quanjer & Tammeling, Forche97, Indien, Knudson/
ITS, Knudson76/ITS, Polgar, Hankinson (NHANES III)
- Comparison pre/post medication possible
- Extrapolated predicted values
Standards: ATS, ERS
SPIROVIT SP-250/SP-260 pneumotach ow sensor for spirometry tests:
Dimensions: 118 x 36 x 28 mm, approx. 120 g
Measuring method: Pneumotach sensor
Measuring range:
- Flow: 0 to +/- 14 l/s
- Volume: 0 to +/- 11 l
Measurement accuracy: in accordance with ATS/ERS
Flow impedance: < 0.2 mbar * s/l at 12 l/s