User's Manual

14
ENGLISH
NEXIA HOME INTELLIGENCE FUNCTIONS
This lock is equipped with a
Z-Wave radio, which allows it
to integrate seamlessly with
the Nexia Home Intelligence
System. Enrolling is the
process of adding the lock to
your Nexia Home Intelligence
account. To enroll the lock,
you must fi rst have a Nexia
Home Bridge and Nexia Home
Intelligence account.
Function Descriptions
Enroll the Lock Turns the Z-Wave radio on and enrolls the lock.
Verify Lock Enrollment Verifi es that the lock is enrolled in a Z-Wave network. You do not
need to put the Bridge into enrollment mode for verifi cation
Unenroll the Lock Unenrolls the lock and turns the Z-Wave radio off.
The Nexia Home Bridge
To enroll the lock, you must fi rst put your Nexia
Home Bridge into enrollment mode:
1. Install a fresh, high-quality 9V battery into the
Bridge.
2. Hold the Bridge within 6 feet (1.8 meters) of the
lock throughout the entire enrollment process.
3. Press and release the plus (+) button on the
Bridge.
4. Then perform the following functions on the lock.
To unenroll the lock, you must fi rst put your
Nexia Home Bridge into unenrollment mode:
1. Install a fresh, high-quality 9V battery into the
Bridge.
2. Hold the Bridge within 6 feet (1.8 meters) of the lock throughout the entire unenrollment
process.
3. Press and release the minus (-) button on the Bridge.
4. Then perform the following steps on the lock.
Function Procedures
Function Enter Programming Mode Function Steps
Enroll the Lock
6 Digit
Programming
Code
OR
Blinking
The lock was
enrolled.
The lock was
not enrolled.
Verify Lock
Enrollment
6 Digit
Programming
Code
OR
Blinking
The lock is
enrolled.
The lock is not
enrolled.
Unenroll the Lock
6 Digit
Programming
Code
OR
Blinking
The lock was
unenrolled.
Unerollment
failed. The lock
is still enrolled.
 For more information about Nexia Home Intelligence,
please browse to www.nexiahome.com.
 The Z-Wave radio is disabled by default to conserve
battery life. When the lock is enrolled for the fi rst time,
the radio is automatically enabled.
 If you no longer wish to use the Nexia Home Intelligence
system, make sure to unenroll the lock to conserve
battery life.
+
-
Plus Button
Minus Button