User's Manual

7
ENGLISH
 You can add or delete another User Code, without leaving programming mode. Press 1 or
2 respectively after the green success symbol and start at the Function Steps again.
 If you make a mistake, press the Outside Schlage Button to leave Programming Mode,
and then start over. Programming Mode will automatically time out after 30 seconds of
inactivity.
Programming Descriptions
Add User Code User Codes are used for unlocking the lock. Codes can be 4 - 8
digits long. All codes must be the same length. See Change
User Code Length.
Delete User Code Removes one User Code
Change Programming
Code
The Programming Code is used to put the lock into Programming
Mode. It is 6 digits long.
Enable Vacation Mode When Vacation Mode is enabled, no User Codes can be entered
into the TouchScreen. This provides extra security while you are
away from your home for an extended period of time.
Disable Vacation Mode Returns lock to normal operation.
Enable/Disable Beeper The beeper can be turned off if desired. Beeps will still sound
during programming.
Delete ALL User Codes Removes ALL User Codes from the lock.
Enable/Disable Lock
& Leave
When Lock & Leave Mode is enabled, the lock can be locked
from the outside by simply pressing the Outside Schlage Button.
When disabled, a User Code must be entered to lock from the
outside. This feature is enabled by default.
Change User Code
Length
You can change the length of the User Codes in your lock. User
Codes can be 4 - 8 digits in length. Default is 4 digits.
Changing
the User Code length will delete all existing User Codes!
Enable/Disable Auto
Lock
When Auto-Lock is enabled, the lock will automatically relock
itself 30 seconds after being unlocked. This feature is disabled
by default.
Function Enter Programming Mode Function Steps
Enable/Disable
Beeper
6 Digit
Programming
Code
Enable: 2 blinks + 2 beeps
Disable:1 blink + 1 beep
Blinking
Delete ALL User
Codes
6 Digit
Programming
Code
Wait for
6 Digit
Programming
Code
Blinking 3 blinks +
3 beeps
3 blinks +
3 beeps
Warning
Removes ALL User Codes from the lock. User Codes cannot be retrieved
after they are deleted!
Enable/Disable Lock
& Leave
6 Digit
Programming
Code
Enable: 2 blinks + 2 beeps
Disable:1 blink + 1 beep
Blinking
Change User Code
Length
6 Digit
Programming
Code
Desired User
Code Length
2 blinks +
2 beeps
Blinking
Warning
Changing the User Code length will delete all existing User Codes!
Enable/Disable Auto
Lock
6 Digit
Programming
Code
Enable: 2 blinks + 2 beeps
Disable:1 blink + 1 beep
Blinking