User's Manual

2 Align assembly and install on door.
Let the wire hang on the other side, through the hole.
WARNING
Do not pinch ribbon cable!
WARNING
Ensure that the lever catch pin is aligned with latch side
before continuing!
Latch tail ts inside slide.
Install Inside Assembly.
3 Install backplate rst, then route ribbon cable.
CAUTION
Do not pinch ribbon cable!
Route cable through indicated space.
4 Install spring cage.
Align lever catch pin to door edge.
Lever Catch Pin
Actual Size
5 Install inside escutcheon.
5a Connect the cable from the outside escutcheon to the
port on the inside escutcheon.
5b Place inside escutcheon on backplate, and slide down to
hook onto backplate. Secure with screws.
Actual Size