User Manual

9
ENGLISH
Changing the Alarm Setting
After you power on the alarm, it will be preset to the Forced Entry alert, by default. If you want
to change it from Forced Entry to another alert setting, follow these simple steps:
 The alarm must fi rst be powered on before changing the alert setting!
Press and hold.
Release after fi rst
fl ash (about 2
seconds)
Tamper Alert
Click the button until the
MIDDLE light is lit.
SENSITIVITY
Activity Alert
Click the button until the
LEFT light is lit.
Forced Entry Alert
Click the button until the
RIGHT light is lit.
Alert Setting Descriptions
ALARM DESCRIPTION TRIGGER LIGHTS SOUNDS
Activity Perfect for monitoring doors
while you’re at home.
• After the alarm is
triggered, there is a built-in
3-second delay for it to
reset
Every time
the door
opens or
closes
Middle LED
light fl ashes
Two short
beeps
Tamper As the most sensitive alert
setting, the Tamper Alert senses
even subtle activity at the lock,
not just when the door opens,
notifying you immediately of any
tampering.
• Built-in 60-second delay
before device alarms allows
you to exit and lock the
door
Every
time the
thumbturn/
lock is
disturbed
Left and
right LED
lights fl ash
alternately
15 second
Alarm
(90 dB=similar
to the volume
of your smoke
alarm)
Forced
Entry
Perfect for nighttime or when
you’re away from home.
• Acts as an effective deterrent
by instantly alerting you, and
others nearby, at fi rst impact
against your door
• Least sensitive mode – many
choose to use this alert setting
all the time
Every time
signifi cant
force pushes
against the
door—like
when
someone
tries to kick
it in.
All lights on
the LED track
fl ash
Three-minute
shrill, steady
alarm
(90 dB=similar
to the volume
of your smoke
alarm)
 If you want to silence an alarm early, press and
hold the Inside Schlage Button until the alarm
sound stops.