User Guide

10 • Schlage • OEM 200 Developer guide
Introduction | Specifications
90mm Antenna
All mounting holes are 3.175 mm (0.125”) diameter. Dimensions shown below are in mm (inches). Mounting hardware
including any bracketing used should be made of non-metallic materials. See Mounting Consideration on page 20.
Mounting holes
0.20
A B C
Board shape
0.20
A B C
8.99
(0.354)
16.13
(0.635)
10.87
(0.428)
23.42
(0.922)
50.80
(2.000)
11.33
(0.446)
20.32
(0.800)
10.41
(0.410)
17.15
(0.675)
11.33
(0.446)
B
3.56
(0.140)
91.44
(3.600)
34.29
(1.350)
C
Figure 1.6: 90 mm Antenna Board: Dimensional area and mounting hole locations mm (inches).
3.43
(0.135)
A
Figure 1.7: 90 mm Antenna Board: Vertical height of tallest component off of the board mm (inches).