User Guide

Schlage • OEM 200 Developer guide • 19
Design Considerations
Allegion will require acceptable OEM 200 performance in the final integration. Reference legal contract agreement for
details
Allegion requests the following information about the OEM 200 integration into the host device to ensure optimum
performance of the OEM 200:
• Physical placement of antenna relative to card read location
• Demonstration of acceptable read range performance
• Environmental protection of the OEM 200 from moisture and contaminants
Cable
The OEM 200 comes with a 4 inch flat flex cable to connect the Main board to the Antenna board. For alternate cable length
contact Allegion
Avoid creasing, pinching the cable. The cable should be relaxed without tension. Add strain relieve if needed.
95.05
(3.274)
97.13
(3.824)
133.05
(5.238)
Figure 3.1: Dimensions of the OEM 200 Board connected to an 80 mm Antenna. Dimensions shown are in mm (inches).
65.96
(2.597)
86.28
(3.397)
120.95
(4.762)
Figure 3.2: Dimensions of the OEM 200 Board connected to a 90 mm Antenna. Dimensions shown are in mm (inches).