User Guide

Schlage • OEM 200 Developer guide • 7
Introduction
General Description
The OEM 200 module is an embeddable RFID reader component useful for manufacturers creating custom RFID products.
The OEM 200 module contains both 125 kHz proximity, 13.56 MHz contactless smart card capability and supports ISO
Standard 14443 technologies.
The OEM 200 module provides compatibility with certain HID® proximity protocols, GE/CASI ProxLite®, AWID®, Lenel®, and
many 13.56 MHz technologies including Schlage™ smart cards using MIFARE DESFire™ EV1 and MIFARE®. By offering 125
kHz and 13.56 MHz technology in a single compact reader module, the OEM 200 module gives a product the flexibility to be
used in many of the most popular credential technology environments
The OEM 200 Module architecture consists of 2 PCB boards connected by a flexible ribbon cable - see Figure 1.1. The OEM
200 Main Board interfaces with the host device and provides a diagnostic LED interface. The OEM 200 Antenna connects to
the Main Board and has both the 125 kHz and the 13.56 MHz antennas. There are two antenna sizes available; 80mm and
90mm antennas, and both antenna sizes come in multi-tech and smart only versions.
Successful integration of the OEM 200 into the host system is important to Allegion. Information about physical mounting
of the OEM 200, read range performance, and environmental protection should be shared with Allegion to help ensure the
successful operation of the OEM 200.
Figure 1.1: OEM 200 main board connected to an 80mm antenna board via 4 inch flexible cable (Top View)