User Guide

Introduction | Specifications
Schlage • OEM 200 Developer guide • 9
80mm Antenna
All mounting holes are 3.175 mm (0.125”) diameter. The 80mm antenna also has 4 mounting square cutouts which can
accept a custom bracket to ease the installation process. Dimensions shown below are in mm (inches). Mounting hardware
including any bracketing used should be made of non-metallic materials. See Mounting Consideration on page 20.
Mounting holes
0.20
A B C
Board shape
0.20
A B C
12.95
(0.510)
32.77
(1.290)
46.74
(1.840)
32.64
(1.285)
16.51
(0.650)
16.13
(0.635)
15.62
(0.615)
18.67
(0.735)
10.57
(0.416)
C
3.56
(0.140)
B
79.38
(3.125)
34.29
(1.350)
Figure 1.4: 80 mm Antenna Board: Dimensional area and mounting hole locations in mm (inches).
3.43
(0.135)
A
Figure 1.5: 80 mm Antenna Board: Vertical height of tallest component off of board in mm (inches).