User Guide

8 • Schlage • OEM 200 Developer guide
Introduction | Specifications
Specifications
OEM 200 Main Board
All mounting holes are 3.175+/- 0.08 mm (0.125”) diameter. Dimensions shown below are in mm (inches).
Mounting holes
0.20
A B C
Board shape
0.20
A B C
3.00
(0.118)
55.00
(2.165)
3.00
(0.118)
25.00
(0.984)
22.00
(0.866)
40.00
(1.575)
B
C
Figure 1.2: OEM 200 Main board area and mounting hole locations mm (inches).
6.00
(0.236)
3.15
(0.124)
A
6.10
(0.240)
Figure 1.3: Vertical height of tallest component off of the OEM 200 Main board mm (inches).