Installation Guide

5 Install baseplate.
Actual Size
Slides through same hole as wire.
Holds keypad and baseplate
together during installation.
6 Connect wire and 9V battery.
Lock will beep when
battery is connected.
7 Place battery in holder and tuck wires.
Any wire routing is acceptable as long
as wires will not be pinched by cover.
8 Install cover.
Actual Size
9 Install reinforcement plate and strike into door jamb.
1¹⁄₈"
(29 mm)
2³⁄₄"
(70 mm)
1"
(25 mm)
¹⁄₈" (3 mm)
Pilot Hole
¹⁄₈" (3 mm)
3" (76 mm) Deep
1¹⁄₂" (38 mm)
1" (25 mm)
Deep
Strike Cut-Out (not to scale)
Rotate 180˚ if
door stop is on
left side.
For maximum
security, install
reinforcement
plate.
Actual Size
Actual Size
Door Stop
CAUTION
Cam MUST be vertical!
Review Step 1!