Installation Guide

11
ENGLISH
9d Secure the Alarm Assembly to the Support Plate.
Install the lower screw first.
Actual Size
8-32 x .187 UP
FHMS
Actual Size
8-32 x 1Z\,”
NOTE
Please do not rotate the thumbturn at this time. It may not rotate
easily. Setup will be performed aer installation is complete.
10 Install the Batteries.
10a Install the batteries into the battery tray.
1. Unsnap the connector.
2. Remove the battery tray.
3. Install four high-quality alkaline AA
batteries.
»
Lithium batteries may cause
undesirable operation.
4. Carefully replace the battery tray, with the
batteries facing the door.
5. Snap the connector back into place.
-
+
-
+
-
+
-
+
ELECTROSTATIC DISCHARGE
WARNING!
Touching the circuit board
may damage the lock!