Installation Guide

7
ENGLISH
7c Install the bolt into the door.
Choose the picture below that matches your door.
FIgure A: Mortise
Figure B: No Mortise
Use a block of wood
and a hammer (not
included) to tap the bolt
into place. You don’t
need to use the screws.
Actual Size (2)
OR
Make sure
the word
TOP faces
up when
installing
the bolt.
7d Install the strike into the frame.
Install all the parts shown for maximum security.
»
In order to maintain BHMA Grade 1, you must install the included reinforcement
plate and strike.
Actual Size (2)
Reinforcement Screws: Actual Size (2)
Door Stop
Make sure this
hole is at least 1”
(25 mm) deep.
»
The reinforcement screws may not fit on doors with sidelights.