User Guide

ManualsBrandsSchlage ManualsHardwareCO-Series Commercial Electronic Cylindrical Lock with Proximity and Sparta Lever Less Schlage FSIC Cylinder

CO-200 Ofﬂ ine Lock User Guide

MANUAL LOCK PROGRAMMING

Left LED

Right LED

When adding a card credential, the 3-6 digit code (PIN) entered prior to presenting the card

becomes the credential reference number. This number can be used to delete a card without

physically having the card. Keep a log of all issued credential reference numbers and codes

for future reference.

Credential Types

Credential Type Function Description

Programming Used to program the lock – does not unlock the lock Five-digit code OR card

Normal Use Unlocks the lock momentarily PIN (3 - 6 digits) OR card

Normal Use +PIN PIN (3 - 6 digits) AND card

Toggle Changes the state of the lock from locked to

unlocked, or vice versa, unless in a Freeze state

PIN (3 - 6 digits) OR card

Toggle +PIN PIN (3 - 6 digits) AND card

Freeze Freezes the lock in the current state – lock remains

frozen until Freeze credential is presented again

PIN (3 - 6 digits) OR card

Freeze +PIN PIN (3 - 6 digits) AND card

Pass-Through Unlocks a lock momentarily, regardless of state

Overrides a lock in Freeze state

PIN (3 - 6 digits) OR card

Pass-Through +PIN PIN (3 - 6 digits) AND card

Programming Legend

Symbol Description

[Programming Code]

Five-digit code, identical to programming credential

code listed in the Credential Types table.

Programming Card

Programming Card, identical to programming

credential card listed in the Credential Types table.

[PIN]

Three- to Six-digit code. A PIN can be any of the

PIN code types listed in the Credential Types table.

A PIN entered before a card credential becomes the

credential reference number.

Asterisk key on the keypad

Number keys on the keypad

Schlage button

1 Programming codes such as 1-1-1-1-1 or 1-2-3-4-5 can be easily selected by non-authorized

users and should not be used.

TIPS

The Schlage button has two different

LEDs, one on the left and one on the right.

All locks have a default programming

code of 97531 and “

”.

All locks have a default normal use

code of 13579 and “#”.

TIP

Use the same

programming code

for all locks in the

facility.