S200-SERIES Interconnected Entrance Locks
S 200-SERIES Application Multi-family dwellings, hotel/motel, office and light duty commercial use. INDEX Cylinders 4-5 Designs & Finishes 2 Door Handing 8 Door Preparation 1 Simultaneous retraction of deadbolt and latch for single-motion egress. Functions 3 How to Order 9 Independent heavy duty torsion springs. Interchangeable Core 5 Handicap compliant levers. Latches 6 Patented reinforcer for deadbolt strike in wood frame to withstand kicking and prying.
S 200-SERIES Specifications Certifications Handing: Not handed, except Flair design. ANSI Meets or exceeds A156.12 Series 4000, Grade 2 strength and operational requirements. Door Thickness: 1⅜" to 2" (35 mm-51 mm). Backset: 2⅜" (60 mm) Standard, 2¾" (70 mm) and 5" (127 mm) available. Fronts: Steel. 1⅛˝ x 2¼˝ (29 mm x 57 mm) square corner, beveled, for 2¾˝ backset standard. For availability with specific backsets, see page 6. Lock Chassis: Steel, zinc dichromate plated for corrosion resistance.
S 200-SERIES Designs & Finishes Outside Inside FLAIR Symbol: FLA Material: Pressure cast zinc Finishes: 605, 606, 609, 612, 613, 625, 626 9" 228 mm 9" 228 mm 4" 102 mm 2-1/2" 64 mm 605 Matches D-Series ATHENS and L-Series 07 designs 8" 203 mm SATURN Symbol: SAT Material: Pressure cast zinc Finishes: 605, 606, 609, 612, 613, 625, 626 626 NEPTUNE Symbol: NEP Material: Pressure cast zinc Finishes: 605, 606, 609, 613, 625, 626 Schlage 8" 203 mm 4-1/4" 108 mm 2-1/2" 64 mm 626 Matches D-Series
S 200-SERIES Functions ANSI A156.12-1992, Grade 2 SCHLAGE ANSI S210PD F95 Schlage S251PD F97 Schlage S270PD Schlage Schlage SCHLAGE ANSI Entrance, Single Locking Deadbolt operated by key from outside or by turn unit from inside. Bolt automatically deadlocks when fully thrown. Latchbolt retracted by lever from either side. Turning inside lever retracts deadbolt and latchbolt simultaneously for immediate exit.
S 200-SERIES Standard Cylinders Schlage® locks are provided with cylinders precision built to extremely close tolerances and the highest standards of accuracy. Using only solid brass plugs, extruded brass shells, phosphor bronze springs, nickel silver keys and pins, ensures long life and ease of operation. Conventional cylinders are available in Classic keyways or in the newly patented Everest® keyways. Specify keyway to differentiate between Everest and Classic. Example: C (Classic) vs. C123 (Everest).
S Interchangeable Core Schlage 200-SERIES Cores and IC Cylinders & Parts Full Size Core Schlage® figure-8 interchangeable core (IC) locksets allow immediate rekeying at the door simply by using the special control key to replace the core in seconds. IC locksets are available in all designs except Flair, Full size interchangeable cores can be integrated into any 5 or 6-pin Schlage key with no adverse affects on keying capacity.
S 200-SERIES Latches & Deadbolts The standard universal backset deadlatch fits both 2⅜" (60 mm) and 2¾" (70 mm) backsets. They are adjustable for flat or beveled edge doors and have a ½" (13 mm) throw. Orders for complete locks are provided with a G506-815 sleeve for 7/8” diameter latches installed in doors with 1" (25 mm) edge bore. Sleeve G506-815 Deadbolts have 1" (25 mm) housings and " (25 mm) throw. All latches and bolts for the S200-Series have 1 1/8” x 2 1/4” square corner fronts.
S 200-SERIES Strikes 10-055 10-064 10-092 10-095 Deadbolt Strikes Part Number Description 10-055 Square corner, box, 1 1/8˝ x 2 3/4˝, standard 10-064 Circular drive-in, thimble strike, 1 3/16˝ diameter, 494 (for 626) only 10-092 1/4" Radius round corner, full lip, no box, 1 5/8˝ x 2 1/4˝ 10-095 Square corner, full lip, no box, 1 5/8˝ x 2 1/4˝ 10-001 10-026 10-027 Lip Length — 1 1/8˝ 10-058 Deadlatch Strikes Part Number Description 10-001 Square corner, T-strike, box, 1 1/8˝ x 2 3/4˝,
S 200-SERIES Door Handing Specify handing when ordering Flair design locksets and any split finish locksets. All other Schlage S200-Series locks are non-handed. Follow the diagram to correctly determine the hand of the door.
S 200-SERIES How to Order To order Schlage products, descriptive data should be in the same sequence as shown.
Administrative Offices 1915 Jamboree Drive, Suite 165 Colorado Springs, CO 80920 (719) 264-5300 FAX (719) 264-5382 Commercial Customer Service 2315 Briargate Parkway, Suite 700 Colorado Springs, CO 80920 (800) 847-1864 FAX (800) 452-0663 Order Entry FAX (800) 452-0665 Residential Customer Service P.O.