User manual

9
200-SERIES
S
Note: Schlage order forms are available at no charge by contacting your IR Security & Safety Consultant or Customer Service.
How to Order
To order Schlage products, descriptive data should be in the same sequence as shown.
Line Outside Inside
Item Des Fin Des Fin
12 3 45678 9 10 11 12
Product
Qty
Latch
Hand
Strike Additional Details
Dim
Line Outside Inside
Item Des Fin Des Fin
1 5 S251PD FLA 605 RH KA4
2 5 S210LD SAT 626 Less Cylinder
3 5 20-729 626 1AA-100AA
Product
Qty
Latch
Hand
Strike Additional Details
Dim
EXAMPLE
1 Line item number
2 Quantity
3 Complete model number with function and cylinder type
4 / 5 Outside design / finish.
6 / 7 Inside design / finish. Leave blank if same as outside.
8 Hand (Required only for Flair design and split-finish locksets)
9 Latch. Leave blank for standard or specify part number for optional latch. LLL=Less Latch.
10 Strike. Leave blank for standard or specify part number for optional strike. LLL=Less Strike.
11 Dimension for strike lip lengths. See strike page for availability of specific dimensions with specific strikes.
100 = 1
118 = 1⅛
114 = 1¼
138 = 1⅜
112 = 1½
134 = 1¾
200 = 2
12 Keying detail (e.g. key symbol, keyway, bitting) and other special requirements.
To order cylinder options, change “PD” at the end of the model number as follows:
S251PD Standard
S251LD Less standard cylinder (For Primus cylinder, specify this option and order Primus cylinder separately.)
S251JD Prepared for full size interchangeable core, less core
S251RD With full size conventional interchangeable core installed. Order control keys separately.
S251TD With full size (temporary) construction core installed. Order all keys separately.