User manual

200-SERIES
S
5
Low, 10-32 Bolts
Interchangeable Core
Schlage
®
figure-8 interchangeable core (IC) locksets allow
immediate rekeying at the door simply by using the special
control key to replace the core in seconds.
IC locksets are available in all designs except Flair,
Full size interchangeable cores can be integrated into any 5
or 6-pin Schlage key with no adverse affects on keying capacity.
To order complete locks with full size cores, change suffix
from PD to RD. Example: S251RD. To order locks less core,
change suffix to JD. To order with full size construction core,
change suffix to TD.
Number Description
22-061 Housing less core
22-064 Housing with conventional core
20-784 Housing with Primus core
IC Cylinders for Deadbolt (Top) Tailpiece not included.
SchlageSchlage
Number Description
23-030 Conventional core
20-740 Primus high security core
Full Size Interchangeable Cores
Full Size Core
Available 606 and 626 finish only. Everest C123 keyway standard for
Commercial; C keyway standard for Residential.
Cores and IC Cylinders & Parts
Available 605, 606, 609, 612, 613, 625, 626.
Everest C123 keyway standard for Commercial; C keyway standard for
Residential.
JUPITER
Symbol: JUP
Material: Pressure cast zinc
Finishes: 605, 606,
613, 625, 626
NEPTUNE
Symbol: NEP
Material: Pressure cast zinc
Finishes: 605, 606, 609,
613, 625, 626
SATURN
Symbol: SAT
Material: Pressure cast zinc
Finishes: 605, 606,
613, 625, 626
626
626
626
4-1/4"
108 mm
2-1/2"
64 mm
8"
203 mm
4-1/4"
108 mm
2-1/2"
64 mm
8"
203 mm
4-1/4"
108 mm
2-1/2"
64 mm
8"
203 mm
IC Installation Tool
This tool is used to install the driver and
retainer for full size IC in Schlage knobs
and levers. Its other ends are designed to
install and remove mortise cylinder
housings and test mortise cylinder cam
action for both small format and full size
interchangeable core cylinders.
M504-413
(Order separately.)
Matches
D-Series SPARTA
and L-Series 17
designs
Matches
D-Series RHODES
and L-Series 06
designs
Matches
D-Series ATHENS
and L-Series 07
designs