User Guide

10
ENGLISH
Use the Schlage Sense app to record and keep track of your
access codes!
If you are not using the Schlage Sense app, use these tables to record programming
and access codes that you program into the lock.
»
Use a pencil to enter the codes in the boxes so you can easily change them later.
• The Programming Code can be any combination of six numbers entered into the
keypad to put the lock in Programming Mode.
• The first 4-6 numbers (depending on access code Length) must be different from
all of the access codes currently in the lock.
• One Programming Code is programmed into the lock by default. This code can be
found on the stickers, one on the back of the Alarm Assembly and one on the back
of this guide.
Access Codes
»
Up to 30 access codes can be stored in the lock at one time.
• An access code can be any combination of 4 - 8 digits entered into the keypad to
unlock the lock.
• The first 4-6 digits must be different from the first 4-6 digits of the Programming
Code.
• Two access codes are programmed into the lock by default. These two codes can
be found on the stickers, one on the back of the Inside Alarm Assembly and one
on the back of this guide.
Best Practices
• Give each person their own unique access code.
• Change access and Programming Codes periodically to ensure security.
MY CODES