Quick Start Guide
Backup Key Parts Backplate Battery Cover Touchscreen Assembly Inside Assembly Strike Reinforcement Plate Bolt Reinforcement Screws Backplate Screws Inside Assembly Screws Bolt/Strike Screws
Start here! schlage.com/encode-workswith Visit schlage.com/encode-workswith to setup and control your with your smartphone.
Touchscreen Communication Icon •• Flashes when lock is connecting to WiFi to check for updates. Low Battery Icon •• Flashes after code is entered when battery is low. •• Solid when battery is critical. The lock will not work without new batteries. Programming and Input LED •• Flashes white on every digit that is entered. •• Amber when using manual programming mode. Home Button and Checkmark Icon •• Turns on keypad backlight. •• Starts WiFi connection process.
1 2 3 4 5 Tools Phillips screwdriver Don’t use a power drill! step 1 Remove existing lock. Remove the entire deadbolt, including the bolt. You may also want to remove the strike. A standard Schlage deadbolt is shown. Check with your specific deadbolt manufacturer if you need help.
step 2 Need Help? Visit schlage.com/faqs-encode. Install the bolt. You may have to adjust your bolt length. Make sure the slot in the bolt is centered in the hole. Slot is centered in the hole. No change needed. Make sure the word “TOP” is facing up. Twist the faceplate to extend. Actual Size Keep twisting until 2 ¾”.
step 3 Need Help? Trouble installing the strike reinforcer? Visit schlage.com/faqs-encode and follow interactive instructions. Install the strike into the door frame. If you have a window next to your door, you may not be able to use the longer wood screws to install the reinforcer. Install this strike reinforcer for enhanced security.
step 4 Is it hard to install the touchscreen? Is the tailpiece not installing correctly? If your through hole seems too small, you may need to remove the spacer. Visit schlage.com/faqs-encode. Install the touchscreen. Route the cable through the door BELOW the bolt. Align the tailpiece as shown and push the touchscreen onto the door. The bump on the tailpiece aligns with the slot in the bolt.
4 3 2 1 5 5 step Phillips screwdriver Don’t use a power drill! You may damage your lock! Install the backplate. Route the cable under the bolt and through the hole on the bottom of the backplate. Secure the backplate with screws. Make sure the outside touchscreen is straight before tightening screws all the way.
step 6 Connect the cable. Tuck the cable and connector in the space above the spindle.
5 4 3 2 7 1 step Phillips screwdriver Don’t use a power drill! You may damage your lock! Secure the lock to the door. If the bump on the tailpiece doesn’t align with the slot in the back of the inside assembly, make sure your thumbturn is vertical (up and down). The bump on the tailpiece aligns with the slot in the back of the inside assembly.
step 8 Install batteries and slide the cover on. Pull out battery holder. Install batteries. Reinstall battery holder. Turn the battery holder around so the batteries face the door.
That wasn’t so bad, was it? Your lock is now installed! Remember, you still have to set up your lock to use it. step 9 Set up your lock. 1. Open your door! 2. Enter one of the two default user codes. 3. Your lock will enter a setup routine. When the bolt stops moving, setup is complete. Final test! 1. Close your door. 2. Extend and retract the bolt using the inside thumbturn. 3. Make sure the bolt retracts smoothly. 4. Open your door. 5. Extend the bolt using the inside thumbturn. 6.
Now that your lock is installed you can use a smart home system to lock and unlock your door from anywhere and add user codes for guests and household members. schlage.com/encode-workswith Visit schlage.com/encode-workswith for a list of compatible smart home apps that allow you to control your with your smartphone.
Lock and unlock To lock your door just tap the lock icon. You can also lock your door from inside by turning the thumbturn toward the door edge. To unlock your door enter a user code. You can also unlock your door from inside by turning the thumbturn away from the door edge.
Questions about your new Smart WiFi Deadbolt? Please don’t return it to the store! Let us help you first! www.schlage.com/faqs-encode © Allegion 2018 Printed in U.S.A. P518-415 Rev.