ND-Series Service Manual

Schlage • ND-Series service manual • 5
Introduction
This manual contains a complete listing of ND-Series (Grade 1) cylindrical lock parts and assemblies manufactured by the
Schlage Lock Company. This edition lists components of ND-Series locks manufactured aer November, 2003.
This manual provides exploded views of each lock chassis and trim assembly with an accompanying chart to identify parts for
replacement purposes, along with lock trim ordering procedures, general cylinder information, and all auxiliary components of
the ND-Series cylindrical locks.
Standard Features*
Certifications
ANSI A156.2, 2003, Series 4000, Grade 1, UL
listed for 3-hour fire door
Latch
1Z\,” x 2Z\v, Square corner faceplate, 1” housing
diameter, Z\x” throw
Strike
1Z\v” x 4M\,, ANSI, Square corner, no box
Backset
2C\v
Cylinder 6-Pin solid brass, keyed 6-pin, C123 keyway,
keyed different (KD)**
Door Range
Standard Lock Functions: 1B\,” – 2Z\,
Vandlgard® Lock Functions: 1B\,” – 2Z\,
ND85: 1C\v” – 2”
Keys Two nickel silver cut keys per lock, 6-pin, C123
section**
* Locks are furnished with standard features unless otherwise specified.
** Items specified in C keyway will be furnished with cylinder keyed 5-pin and with 5-pin keys unless otherwise specified.
Lock assembly drawing index
The Lock assembly drawing Index provides illustrations and textual descriptions of available functions. Page numbers for full
trim and chassis drawings are referenced.
Outside Inside
Key Push button
Electrified
Vandlgard
®
Lever
Active Lever
Deadlatch
Springlatch
Turn/push button
Blank Plate
Fixed Lever
Request to Exit