ND-Series Service Manual

ManualsBrandsSchlage ManualsSchlage CommercialSchlage Sparta Commercial Heavy Duty Vandlgard Keyed Corridor Door Lever Set with Full Size Interchangeable Core - BHMA Grade 1

ND-Series

Service manual

Summary of content (101 pages)

PAGE 1
ND-Series Service manual
PAGE 2
Contents 5 Introduction 49 Trim assemblies 5 Lock assembly drawing index 6 Lock assembly drawing index 11 Chassis 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 Passage latch Exit lock Exit lock with request-to-exit Exit lock— Electrically locked (fail safe) Exit lock— Electrically locked (fail safe) with request-to-exit Exit lock— Electrically unlocked (fail secure) Exit lock— Electrically unlocked (fail secure) with request-to-exit Single dummy trim Exit lock wi
PAGE 3
92 Parts and kits 92 Full size IC and SFIC (small format interchangeable core) configurations Lever designs Tactile warning Competitor cylinder options Spring cage and tailpiece for competitor cylinder options Roses Cylinders Latches Installation tools and kits Strikes Screws, screw packs and special parts 93 93 94 94 95 95 96 96 98 99 100 Finishes 100 Finish codes and descriptions 100 Ordering procedures 101 Limited warranty iv • Schlage • ND-Series service manual
PAGE 4
Introduction This manual contains a complete listing of ND-Series (Grade 1) cylindrical lock parts and assemblies manufactured by the Schlage Lock Company. This edition lists components of ND-Series locks manufactured after November, 2003.
PAGE 5
Lock assembly drawing index Lock assembly drawing index Function ANSI A156.2, 1996, Series 4000, Grade 1 Trim Chassis Schlage ANSI Description Outside function Inside function Page Page ND10 F75 Passage latch Lever is always unlocked. Lever is always unlocked and is always free for immediate egress. 50 12 ND12 F89 Exit lock Lever is fixed. Lever is always unlocked and is always free for immediate egress. 51 13 Exit lock with request to exit Same as ND12. Same as ND12.
PAGE 6
Lock assembly drawing index Function Schlage ANSI A156.2, 1996, Series 4000, Grade 1 ANSI Trim Chassis Description Outside function Inside function Page Page Exit lock with blank plate Blank plate. Inside lever is always 58 20 ND25 x 70 Classroom exit lock† per XN12-004 Blank plate. Key locks or unlocks lever. 59 21 ND25 x 80 Storeroom exit lock† per XN12-005 Blank plate Key retracts latch. Lever is fixed. 60 22 ND30 Patio lock per XN12-007 Push-button locks outside lever.
PAGE 7
Lock assembly drawing index Function ANSI A156.2, 1996, Series 4000, Grade 1 Trim Chassis Schlage ANSI Description Outside function Inside function Page Page ND66 F91 Store lock*† Key locks or unlocks both levers simultaneously. Key locks or unlocks both levers simultaneously. 68 26 ND70 F84 Classroom lock* Outside lever locked or unlocked by key. Inside lever is always unlocked and always free for immediate egress.
PAGE 8
Lock assembly drawing index Function Schlage ANSI A156.2, 1996, Series 4000, Grade 1 ANSI Trim Chassis Description Outside function Inside function Page Page Storeroom lock— electrically locked (Fail safe)* with request to exit Same as ND80EL-RX. Same as ND80EL. 78 36 ND80EU Storeroom lock—electrically unlocked (Fail secure)* Lever is continuously locked mechanically until unlocked by electric current. When locked, key retracts latch.
PAGE 9
Lock assembly drawing index Function ANSI A156.2, 1996, Series 4000, Grade 1 Trim Chassis Schlage ANSI Description Outside function Inside function Page Page ND94 F84 Classroom lock with Vandlgard®* Outside lever locked or unlocked by key. Vandlgard allows outside spindle to disengage from latch when locked. Inside lever is always unlocked and is always free for immediate egress. 86 43 Classroom security lock with Vandlgard®* Outside lever locked or unlocked by key in either lever.
PAGE 10
Chassis 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 Passage latch Exit lock Exit lock with request-to-exit Exit lock— Electrically locked (fail safe) Exit lock— Electrically locked (fail safe) with request-to-exit Exit lock— Electrically unlocked (fail secure) Exit lock— Electrically unlocked (fail secure) with request-to-exit Single dummy trim Exit lock with blank plate Special— classroom exit lock Special— storeroom exit lock Patio, bath/
PAGE 11
Chassis Passage latch ND10 37 52 23 30 38 1 a 53 a a 29 a 38 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 12
Chassis Exit lock ND12 37 52 23 30 22 8 1 a 53 a a a a 29 38 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 13
Chassis Exit lock with request-to-exit ND12 RX 37 52 23 30 22 8 1 a 53 a a a 49 29 51 a 27 6 48 a No. Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 14
Chassis Exit lock— Electrically locked (fail safe) ND12EL 37 52 26 30 28 1 15 a 34 a a 33 36 53 29 a 35 32 39 a 27 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 15
Chassis Exit lock— Electrically locked (fail safe) with request-to-exit ND12EL RX 37 52 26 30 28 15 1 a a 34 a 33 53 36 29 a 35 31 49 46 a 27 6 48 a No. Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 16
Chassis Exit lock— Electrically unlocked (fail secure) ND12EU 37 52 26 28 30 15 1 a a 34 a 33 53 36 29 a 35 31 39 a 27 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 17
Chassis Exit lock— Electrically unlocked (fail secure) with request-to-exit ND12EU RX 37 52 26 30 28 15 1 a a 34 a 33 53 36 29 a 35 31 49 46 a 27 6 48 a No. Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 18
Chassis Single dummy trim ND170 45 14 5 No. Description Part number No. 5 Spindle pin C604-340 45 14 Spring cage assembly N123-019 Description Dummy insert Part number N523-069 For mounting two ND170 as double trim, see page 57.
PAGE 19
Chassis Exit lock with blank plate ND25 37 52 30 23 1 53 a a 29 38 a 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 20
Chassis Special— classroom exit lock ND25X70 37 52 30 23 1 29 53 25 a a a 10 22 a 6 a No. Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 21
Chassis Special— storeroom exit lock ND25X80 37 52 30 23 1 29 53 25 a a a 8 22 a a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 22
Chassis Patio, bath/bedroom privacy and hospital privacy lock ND30, ND40 and ND44 37 52 30 23 1 22 4 17 2 a 53 a a a 29 38 a 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 23
Chassis Entrance/office and entrance lock ND50 and ND53 37 52 30 23 1 22 7 4 3 a 53 a a a 29 38 a 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. No.
PAGE 24
Chassis Vestibule lock ND60 37 52 23 30 22 7 1 a 53 a a 41 a 40 29 38 a 24 6 42 43 a No. Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 25
Chassis Store lock ND66 37 52 23 30 22 9 1 a a 53 a a a 29 44 9 22 a 25 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 26
Chassis Classroom lock ND70 37 52 23 30 22 10 1 a 53 a a a 29 38 a 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 27
Chassis Special— classroom by storeroom lock ND70X80 37 52 23 30 22 1 10 29 a a 53 25 a a 8 22 a a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. No.
PAGE 28
Chassis Special— communicating lock ND72 37 52 23 30 22 1 10 29 a a 53 25 a a 10 22 a 6 a No. Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 29
Chassis Special— communicating lock with Vandlgard® ND72 Vandlgard® 37 52 23 30 22 1 12 29 a a 53 25 a a 12 22 a a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 30
Chassis Corridor lock ND73 37 52 23 30 1 22 10 2 a 53 a 4 a a 29 38 a 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 31
Chassis Classroom security lock ND75 37 52 23 22 30 9 1 a 53 a a a 44 29 38 40 a 24 6 20 a No. Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 32
Chassis Storeroom lock ND80 37 52 23 30 22 8 1 a 53 a a a a 29 38 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 33
Chassis Storeroom lock with request-to-exit ND80 RX 37 52 23 30 22 8 1 a 53 a a a 49 29 51 a 27 6 48 a No. Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 34
Chassis Storeroom lock— Electrically locked (fail safe) ND80EL 37 52 26 30 28 1 15 a 34 a a 33 36 53 29 a 35 32 39 a 27 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 35
Chassis Storeroom lock— Electrically locked (fail safe) with request-to-exit ND80EL RX 37 52 26 30 28 15 1 a a 34 a 33 53 36 29 a 35 31 49 46 a 27 6 48 a No. Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 36
Chassis Storeroom lock— Electrically unlocked (fail secure) ND80EU 37 52 26 28 30 15 1 a a 34 a 33 53 36 29 a 35 31 39 a 27 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 37
Chassis Storeroom lock— Electrically unlocked (fail secure) with request-to-exit ND80EU RX 37 52 26 30 28 15 1 a a 34 a 33 53 36 29 a 35 31 49 46 a 27 6 48 a No. Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 38
Chassis Institution lock ND82 37 52 23 30 22 8 1 a a 53 a a a 29 8 22 a 25 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 39
Chassis Faculty restroom lock ND85 37 52 23 30 22 1 19 4 2 a 53 a a b 29 38 a 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. No.
PAGE 40
Chassis Entrance/office and entrance lock with Vandlgard® ND91 and ND92 37 52 23 30 1 22 11 4 3 a 53 a a a 29 38 a 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 41
Chassis Vestibule lock with Vandlgard® ND93 37 52 23 30 22 11 1 a 53 a a 41 a 29 40 38 a 24 6 42 43 a No. Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 42
Chassis Classroom lock with Vandlgard® ND94 37 52 23 30 22 1 12 a 53 a a a 29 38 a 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 43
Chassis Classroom security lock with Vandlgard® ND95 37 52 23 22 30 18 1 a 53 a a a 29 38 40 a 24 6 44 20 a No. Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 44
Chassis Storeroom lock with Vandlgard® ND96 37 52 23 30 22 13 1 a 53 a a a 29 38 a 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 45
Chassis Storeroom lock with Vandlgard®— Electrically locked (fail safe) ND96EL 37 52 26 30 28 16 1 a a 34 a 33 53 36 29 a 35 32 39 a 27 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 46
Chassis Storeroom lock with Vandlgard®— Electrically unlocked (fail secure) ND96EU 37 52 26 30 28 16 1 a a 34 a 33 53 36 29 a 35 31 39 a 27 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No.
PAGE 47
Chassis Corridor lock with Vandlgard® ND97 37 52 23 30 1 22 21 2 a 53 a 4 a a 29 38 a 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. No.
PAGE 48
Trim assemblies 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 Passage latch Exit lock Exit lock request-to-exit Exit lock—electrically locked (fail safe) Exit lock— electrically locked (fail safe) request-to-exit Exit lock and storeroom lock— electrically unlocked (fail secure) Exit lock and storeroom lock—electrically unlocked (fail secure) request-to-exit Single dummy trim Exit lock with blank plate Special—classroom exit loc
PAGE 49
Trim assemblies Passage latch ND10 A D H J E C P C B K N Q M Letter * Description Part number Letter Description Part number A Outside lever—closed 03-030 J Anti-rotation plate N523-055 B Inside lever—closed 03-030 K Springlatch 13-048 C Rose 03-042 M Strike 10-025 D Outside spring cage—passage N123-043 N Latch screw C603-897 E Inside spring cage—standard N123-032 P Mounting screw N523-021 H Chassis 24088254* Q Strike screw C603-256 Chassis part number is for
PAGE 50
Trim assemblies Exit lock ND12 A D H J CC E DD C P C B K N Q M Letter * Description Part number Letter Description Part number A Outside lever—closed 03-030 K Springlatch 13-048 B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—passage N123-022 P Mounting screw N523-021 E Inside spring cage—standard N123-032 Q Strike screw C603-256 H Chassis 24088262* CC Spring C503-331 J Anti-rotation plate N523-055
PAGE 51
Trim assemblies Exit lock request-to-exit ND12 RX A D H CC J DD E C P C K B N Q M Letter * Description Part number Letter Description Part number A Outside lever—closed 03-030 K Springlatch 13-048 B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—passage N123-022 P Mounting screw N523-021 E Inside spring cage—standard N123-032 Q Strike screw C603-256 H Chassis 24088437* CC Spring C503-331 J Anti-rotat
PAGE 52
Trim assemblies Exit lock—electrically locked (fail safe) ND12EL A C D GG H CC DD E P C K B N J Q M Letter Description Part number Letter Description Part number A Outside lever—closed 03-030 M Strike 10-025 B Inside lever—closed 03-030 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—passage N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 CC Spring C503-331 H Chassis 63-106* DD Catch stop N523-04
PAGE 53
Trim assemblies Exit lock— electrically locked (fail safe) request-to-exit ND12EL RX A C D GG H CC DD E P C K N J B Q M Letter Description Letter Description Part number Outside lever—closed 03-030 M Strike 10-025 B Inside lever—closed 03-030 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—passage N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 CC Spring C503-331 H Chassis 63-215* DD Catch stop N523
PAGE 54
Trim assemblies Exit lock and storeroom lock— electrically unlocked (fail secure) ND12EU A C D GG H CC DD E P C B K N J Q M Letter Description Part number Letter Description Part number A Outside lever—closed 03-030 M Strike 10-025 B Inside lever—closed 03-030 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—passage N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 CC Spring C503-331 H Chassis 63-105* D
PAGE 55
Trim assemblies Exit lock and storeroom lock—electrically unlocked (fail secure) request-to-exit ND12EU RX A C D GG H CC DD E P C K B N J Q M Letter Description Letter Description Part number A Outside lever—closed 03-030 M Strike 10-025 B Inside lever—closed 03-030 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—passage N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 CC Spring C503-331 H Chassis 63-216
PAGE 56
Trim assemblies Single dummy trim ND170 EE H F C B G N523-105 threaded mounting rod Use for mounting two (2) ND170 sets as double dummy set. Letter Description Part number Letter Description Part number B Inside lever—closed 03-030 G Washer A501-171 C Rose 03-042 H Chassis 63-104* F Dummy mounting screws L583-133 EE Dummy through bolt N523-092 * Chassis part number is for reference only.
PAGE 57
Trim assemblies Exit lock with blank plate ND25 BB H J E P C B K N Q M Letter * Description Part number Letter Description Part number B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 E Inside spring cage—standard N123-032 P Mounting screw N523-021 H Chassis 24088296* Q Strike screw C603-256 J Anti-rotation plate N523-055 BB Blank plate N523-002 K Deadlatch 13-047 Chassis part number is for reference only.
PAGE 58
Trim assemblies Special—classroom exit lock ND25X70 ND25X70PD (shown), ND25X70RD†, ND25X70GD† BB H J E P C S K B N Q M Letter Description Part number Letter Description Part number B Inside lever—open 03-031 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 E Inside spring cage—keyed inside except SFIC N123-021 P Mounting screw N523-021 H Chassis 24088213* Q Strike screw C603-256 J Anti-rotation plate N523-055 S Cylinder—6-pin 23-065 K Deadlatch 13-047 BB Blank
PAGE 59
Trim assemblies Special—storeroom exit lock ND25X80 ND25X80PD (shown), ND25X80RD†, ND25X80GD† BB H J E P C S B K N Q M Letter Description Part number Letter Description Part number B Inside lever—open 03-031 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 E Inside spring cage—keyed inside except SFIC N123-021 P Mounting screw N523-021 H Chassis 24088221* Q Strike screw C603-256 J Anti-rotation plate N523-055 S Cylinder—6-pin 23-065 K Deadlatch 13-047 BB Blan
PAGE 60
Trim assemblies Special—patio lock ND30 A C D H CC R DD J E P C K B N Q M V Letter Description Part number Letter Description Part number A Outside lever—closed 03-030 M Strike 10-025 B Inside lever—open 03-031 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—standard N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 R Plunger—push button N123-028 H Chassis 24088304* V Push button N523-000 J Anti
PAGE 61
Trim assemblies Bath/bedroom privacy lock ND40 A D H C Z R Y J E P C K B N Q M V Letter * Description Part number Letter Description Part number A Outside lever—open 03-031 M Strike 10-025 B Inside lever—open 03-031 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—standard N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 R Plunger—push button N123-028 H Chassis 24088304* V Push button N523-000 J
PAGE 62
Trim assemblies Hospital privacy lock ND44 A Y D H C R AA J E P C K B N Q M V Letter * Description Part number Letter Description Part number A Outside lever—open 03-031 M Strike 10-025 B Inside lever—open 03-031 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—standard N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 R Plunger—push button N123-028 H Chassis 24088304* V Push button N523-000 J An
PAGE 63
Trim assemblies Entrance/office lock ND50 ND50PD (shown), ND50RD†, ND50GD† A C D H S R J E P C K B N Q M V Letter Description Part number Letter Description Part number A Outside lever—open 03-031 M Strike 10-025 B Inside lever—open 03-031 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—standard N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 R Plunger—push button N123-028 H Chassis 24088247* S Cy
PAGE 64
Trim assemblies Entrance lock ND53 ND53PD (shown), ND53RD†, ND53GD† A C D H S R J E P C K B N Q M W Letter Description Part number Letter Description Part number A Outside Lever—Open 03-031 M Strike 10-025 B Inside Lever—Open 03-031 N Latch Screw C603-897 C Rose 03-042 P Mounting Screw N523-021 D Outside Spring Cage—Standard N123-022 Q Strike Screw C603-256 E Inside Spring Cage—Standard N123-032 R Plunger—Push and Turn N123-017 H Chassis 24088247* S Cylinder—6
PAGE 65
Trim assemblies Vestibule lock ND60 ND60PD (shown), ND60RD†, ND60GD† A C D H J S E P C S K B N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—open 03-031 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—keyed inside except SFIC N123-021 Q Strike screw C603-256 H Chassis 24088320* S Cylinder—
PAGE 66
Trim assemblies ND60 with closed outside lever: special ND60PD with closed outside lever (shown), ND60RD†, ND60GD† A C D H J CC E DD P C S K B N Q M Letter Description Part number Letter Description Part number A Outside lever—closed 03-030 M Strike 10-025 B Inside lever—open 03-031 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—standard N123-022 Q Strike screw C603-256 E Inside spring cage—keyed inside except SFIC N123-021 S C
PAGE 67
Trim assemblies Store lock ND66 ND66PD (shown), ND66RD†, ND66GD† A C D H J S E P C S K B N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—open 03-031 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—keyed inside except SFIC N123-021 Q Strike screw C603-256 H Chassis 24088338* S Cylinder—6-pi
PAGE 68
Trim assemblies Classroom lock ND70 ND70PD (shown), ND70RD†, ND70GD† A C D H J E S P C B K N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—standard N123-032 Q Strike screw C603-256 H Chassis 24088346* S Cylinder—6-pin 23-065 J A
PAGE 69
Trim assemblies Special—classroom by storeroom lock ND70X80 ND70X80PD (shown), NDX80RD†, ND70X80GD† A C D H J E S P C S B K N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—open 03-031 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—keyed inside except SFIC N123-021 Q Strike screw C603-256 H Cha
PAGE 70
Trim assemblies Special—communicating lock ND72 ND72PD (shown), ND72RD†, ND72GD† A C D H J E S P C S B K N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—open 03-031 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—keyed inside except SFIC N123-021 Q Strike screw C603-256 H Chassis 24088197* S
PAGE 71
Trim assemblies Special—communicating lock with Vandlgard® ND72 Vandlgard® ® ® ® ND72PD Vandlgard (shown), ND72RD Vandlgard *, ND72GD Vandlgard * A C D H J S E P C S B K N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—open 03-031 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—keyed inside except
PAGE 72
Trim assemblies Corridor lock ND73 ND73PD (shown), ND73RD†, ND73GD† A C D H S R J E P C K B N Q M V Letter Description Part number Letter Description Part number A Outside lever—open 03-031 M Strike 10-025 B Inside lever—open 03-031 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—standard N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 R Plunger—push button N123-028 H Chassis 24088353* S Cylinder—
PAGE 73
Trim assemblies Classroom security lock ND75 ND75PD (shown), ND75RD†, ND75GD† A C D H J S E P C S K B N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—open 03-031 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—keyed inside except SFIC N123-021 Q Strike screw C603-256 H Chassis 24088163* S C
PAGE 74
Trim assemblies Storeroom lock ND80 ND80PD (shown), ND80RD†, ND80GD† A C D H J E S P C B K N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—standard N123-032 Q Strike screw C603-256 H Chassis 24088262* S Cylinder—6-pin 23-065 J A
PAGE 75
Trim assemblies Storeroom lock with request-to-exit ND80 RX ND80PD RX (shown), ND80RD RX, ND80GD RX A C D H J S E P C B K N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—standard N123-032 Q Strike screw C603-256 H Chassis 24088437*
PAGE 76
Trim assemblies Storeroom lock— electrically locked (fail safe) ND80EL ND80ELPD (shown), ND80ELRD†, ND80ELGD† A C D GG H S E P C B K J N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Electrified latch ** B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—standard N123-032 Q Strike screw C603-256 H Ch
PAGE 77
Trim assemblies Storeroom lock—electrically locked (fail safe) with request-to-exit ND80EL RX ND80ELPD RX (shown), ND80ELRD RX, ND80ELGD RX A C D GG H S E P C K B N J Q M Letter Description Part number Letter Description Part number A Outside Lever—Open 03-031 K Electrified Latch ** B Inside Lever—Closed 03-030 M Strike 10-025 C Rose 03-042 N Latch Screw C603-897 D Outside Spring Cage—Standard N123-022 P Mounting Screw N523-021 E Inside Spring Cage—Standard N123-032
PAGE 78
Trim assemblies Storeroom lock—electrically unlocked (fail secure) ND80EU ND80EUPD (shown), ND80EURD†, ND80EUGD† A C D GG H S E P C B K J N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Electrified latch ** B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—standard N123-032 Q Strike screw C603-256
PAGE 79
Trim assemblies Storeroom lock—electrically unlocked (fail secure) with request-to-exit ND80EU RX ND80EUPD RX (shown), ND80EURD RX, ND80EUGD RX A C D GG H S E P C B K N J Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Electrified latch ** B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—standard N123-0
PAGE 80
Trim assemblies Institution lock ND82 ND82PD (shown), ND82RD†, ND82GD† A C D H J S E P C S K B N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—open 03-031 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—keyed inside except SFIC N123-021 Q Strike screw C603-256 H Chassis 24088361* S Cylinder—
PAGE 81
Trim assemblies Faculty restroom lock ND85 ND85PD A C D H S R J E P C K B N Q M FF Letter * Description Part number Letter Description Part number A Outside lever—open 03-031 M Strike 10-025 B Inside lever—open 03-031 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—standard N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 R Plunger—push and turn N123-017 H Chassis 24088411* S Cylinder—6-pin indicato
PAGE 82
Trim assemblies Entrance/office lock wtih Vandlgard® ND91 ND91PD (shown), ND91RD†, ND91GD† A C D H S R J E P C K N B Q M V Letter Description Part number Letter Description Part number A Outside lever—open 03-031 M Strike 10-025 B Inside lever—open 03-031 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—standard N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 R Plunger—push button N123-028 H Chassis 24
PAGE 83
Trim assemblies Entrance lock with Vandlgard® ND92 ND92PD (shown), ND92RD†, ND92GD† A C D H S R J E P C K B N Q M W Letter Description Part number Letter Description Part number A Outside lever—open 03-031 M Strike 10-025 B Inside lever—open 03-031 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—standard N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 R Plunger—push and turn N123-017 H Chassis 2408837
PAGE 84
Trim assemblies Vestibule with Vandlgard® ND93 ND93PD (shown), ND93RD†, ND93GD† A C D H J S E P C S K B N Q M Letter * Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—open 03-031 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—keyed inside except SFIC N123-021 Q Strike screw C603-256 H Chassis 24088387*
PAGE 85
Trim assemblies Classroom lock with Vandlgard® ND94 ND94PD (shown), ND94RD†, ND94GD† A C D H J S E P C B K N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Dead latch 13-047 B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—standard N123-032 Q Strike screw C603-256 H Chassis 24088395* S Cylinder—6-
PAGE 86
Trim assemblies Classroom security lock with Vandlgard® ND95 ND95PD (shown), ND95RD†, ND95GD† A C D H J S E P C S K B N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—open 03-031 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—keyed inside except SFIC N123-021 Q Strike screw C603-256 H Chassi
PAGE 87
Trim assemblies Storeroom lock with Vandlgard® ND96 ND96PD (shown), ND96RD†, ND96GD† A C D H S E P C B K J N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—standard N123-032 Q Strike screw C603-256 H Chassis 24088403* S Cylinder—6-
PAGE 88
Trim assemblies Storeroom lock with Vandlgard®— electrically locked (fail safe) ND96EL ND96ELPD (shown), ND96ELRD†, ND96ELGD† A C D GG H S E P C B K J N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Electrified latch ** B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—standard N123-032 Q Strike screw
PAGE 89
Trim assemblies Storeroom lock with Vandlgard®—electrically unlocked (fail secure) ND96EU ND96EUPD (shown), ND96EURD†, ND96EUGD† A C D GG H S E P C B K J N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Electrified latch ** B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—standard N123-032 Q Strike
PAGE 90
Trim assemblies Corridor lock with Vandlgard® ND97 ND97PD (shown), ND97RD†, ND97GD† A C D H S R J E P C K B N Q M V Letter Description Part number Letter Description Part number A Outside lever—open 03-031 M Strike 10-025 B Inside lever—open 03-031 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—standard N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 R Plunger—push button N123-028 H Chassis 24088189*
PAGE 91
Parts and kits Parts and kits Full size IC and SFIC (small format interchangeable core) configurations Full size IC—outside SFIC—outside S S V U T A Old Style IC Driver N523-077 (Obsolete) Letter Old Style IC Driver N523-118 (Obsolete) A C C D Description D Part number Letter Description Part number A Outside lever—full size IC 03-032 A Outside lever—SFIC 03-000 C Rose 03-042 C Rose 03-042 D Outside spring cage—standard N123-022 D Outside spring cage—SFIC N123-056 S Cylinde
PAGE 92
Parts and kits Lever designs All lever designs are available in finishes 605, 606, 612, 613, 619, 625, 626 and 626AM. Athens (ATH) C A 5¹⁄₈" 3⁷⁄₁₆" Closed levers Open levers Interchangeable core levers** SFIC levers 03-030 ATH 03-031 ATH 03-032 ATH 03-000 ATH A=2C\v” A=2C\v” A=3” A=2M\,” B=3B\zn” B=3B\zn” B=3Z\x” B=3C\,” C=2Z\x” C=2Z\x” C=2ZZ\zn” C=2Z\x” 03-030 RHO 03-031 RHO 03-032 RHO 03-000 RHO A=2M\zn” A=2M\zn” A=2C\v” A=2Z\x” B=2ZB\zn” B=2ZB\zn” B=3Z\v” B=3” 03-030
PAGE 93
Parts and kits Competitor cylinder options Competitor lever designs are available in finishes 613, 626 and 626AM. Tactile warning is available. See Tactile warning on page 93 for details.
PAGE 94
Parts and kits Roses Inside/outside rose, 03-042 RHO Standard inside/outside rose for use with ATH, SPA or RHO levers. Omega inside/outside rose, 03-042 OME Standard inside/outside rose for use with OME levers. Blank outside rose, N523-002 Standard inside/outside rose for use with ATH, SPA or RHO levers. Size: 3M\zn” dia. Size: 3M\zn” dia. Size: 3M\zn” dia. Available in 605, 606,612, 613, 619, 625, 626. Available in 605, 606, 612, 613, 619, 625, 626.
PAGE 95
Parts and kits Latches All ND-Series latches have one-inch diameter housing and adjustable faceplates for flat or beveled doors. Deadlatch, 13-047 Springlatch, 13-048 Electrified deadlatch, 13-049 Backset Description Springlatch Deadlatch 2C\,” Square corner, 1Z\,” x 2Z\v” — 14-047 Square corner, 1” x 2Z\v” — 14-048 2C\v” Square corner, 1Z\,” x 2Z\v”, standard 13-048 13-047 2C\v” Square corner, electrified latch, 1Z\,” x 2Z\v” — 13-049 2C\v” Anti-friction fire door latch, square corn
PAGE 96
Parts and kits * Parts may be ordered separately. Installation kit 40-147 Installation kit 40-147 for locksets and deadbolts is adjustable for 2C\,” and 2C\v” backsets. Includes a removable bushing adaptor for M\,” latch hole. For door thickness 1C\,” to 2Z\,”. Part no. Description Part no. Description 40-015 M\,” Bit 40-148 Installation Jig * 40-029 Full Lip Strike Chisel 40-175 1” Bit 1Z\,” x 2C\v” Latch Chisel 40-176 2Z\,” Multi Spur Bit 1Z\x” Multi Spur Bit 40-030 40-031 * 1” x 2Z\v”
PAGE 97
Parts and kits Strikes Square Corner T-Strike, 10-013 Size: 1Z\,” x 2C\v” x C\cx” Lip length: 1Z\,”, 1Z\x” Includes strike box C603-623 Square Corner Fire Door T-Strike, 10-016 Size: 1Z\,” x 2C\v” x C\cx” Lip length: 1Z\,”, 1Z\x” Includes strike box B502-853 Available in 605, 606,612, 613, 619, 625, 626. Available in 605, 606, 612, 613, 619, 625, 626. ElectrIc Strike, 10-042 Size: 1Z\v” x 4M\,” 24 Volt AC 12 Volt DC Available in 606 and 626 only. 98 • Schlage • ND-Series service manual ANSI Prep.
PAGE 98
Parts and kits Screws, screw packs and special parts Screws ANSI strike screw, C603-256 Part no. Description Door thickness Type Size A501-171 ND170, washer – Washer – N523-092 ND170, mounting screw 1Z\x” - 2” POH Machine Z\v”-20 x 2Z\x” C603-256 ANSI strike screw – PFH Combo 12-24 X 1” C603-897 Latch and strike screw – PFH Combo #8 X C\v” N523-021 Spring cage screws 1C\,” - 2” POH Machine #8 X 32 x 2Z\,” N583-133 ND170, Spring cage screws – PFH Combo #8 X 1” Screw pack
PAGE 99
Finishes Finishes Schlage Lock finishes are durable, top quality finishes obtained by the careful processing of solid brass, bronze, stainless steel, or other materials. require different methods of cleaning and care. For example, non-clear coated finishes should not be cleaned with any soaps or solvents. Organically coated surfaces should periodically be cleaned with a mild non-abrasive soap and be buffed lightly with a clean cloth.
PAGE 100
Limited warranty Limited warranty Product warranty: commercial applications Limited warranty Schlage Lock Company, LLC (the “Company”) extends a threeyear limited warranty to the original user of the products manufactured by the Company (the “Products”) against defects in material and workmanship from the date of purchase. Certain Products contain restrictions to this limited warranty, additional warranties or different warranty periods. Please see below for specific Product warranty information.
PAGE 101
About Allegion Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security. As a $2 billion provider of security solutions for homes and businesses, Allegion employs more than 7,800 people and sells products in more than 120 countries across the world. Allegion comprises 23 global brands, including strategic brands CISA®, Interflex®, LCN®, Schlage® and Von Duprin®. For more, visit www.allegion.com. © 2015 Allegion 006499 Rev. 01/15 www.allegion.