User's Manual

ManualsBrandsSchlage ManualsPet FenceSchlage P515-549 FE595

Table of Contents

P515-549

FE575

FE595

BE365

Preset Codes

BE365 Features .......................................................2

Lock Operation ............................................2

Changing the Battery ...................................3

FE575 Features .......................................................4

Lock Operation ............................................4

Changing the Battery ...................................5

FE595 Features .......................................................6

Lock Operation ............................................6

Changing the Battery ...................................7

Programming for All Models ....................................8

Keeping Your Lock Secure .....................................10

Key Override ..........................................................10

Troubleshooting Guide ...........................................11

Emergency Lock Override .....................................12

Place Label Here

Programming Code: 123456

User Code A: 4321

User Code B: 5678

S/N: 1-00000000

Model: BE365

Example

Preset User Codes

BE365, FE575, FE595

Programming/Operating Guide

Preset Programming Code

Serial Number

Lock Series

Summary of content (12 pages)

PAGE 1
BE365, FE575, FE595 Programming/Operating Guide P515-549 Table of Contents BE365 Features.......................................................2 Lock Operation ............................................2 Changing the Battery ...................................3 FE575 Features.......................................................4 Lock Operation ............................................4 Changing the Battery ...................................5 FE595 Features..........................................
PAGE 2
BE365 Features A. B. C. D. E. Button Keypad Key Override Outside Thumbturn Inside Thumbturn A. Button 1. Press to turn on backlight. 2. Press to clear an incorrect code entry. B. Keypad 1. Use to unlock the lock by entering a valid four-digit user code. 2. Use to program the lock. (See page 8.) C. Key Override (See page 10.) D. Outside Thumbturn Freely rotates until deadbolt is activated. Then thumbturn will extend or retract deadbolt. E.
PAGE 3
BE365 Lock Operation Continued Locked - Deadbolt Extended Unlocked - Deadbolt Retracted Locked User code required for entry Deadbolt Unlocked No user code required for entry BE365 Changing the Battery For low battery indications, see page 11. NOTE: Replace with premium 9V alkaline battery. c b a d Reverse steps to assemble lock.
PAGE 4
FE575 Features A. B. C. D. E. Button Keypad Key Override Outside Knob/Lever Inside Knob/Lever A. Button 1. Press to turn on backlight. 2. Press to clear an incorrect code entry. B. Keypad 1. Use to unlock the lock by entering a valid four-digit user code. 2. Use to program the lock. (See page 8.) C. Key Override (See page 10.) D. Outside Knob/Lever Always rotates. Only retracts latch when lock is unlocked. E. Inside Knob/Lever Always rotates and retracts latch for immediate exit.
PAGE 5
FE575 Changing the Battery For low battery indications, see page 11. NOTE: Replace with premium 9V alkaline battery. c f b a e d Reverse steps to assemble lock.
PAGE 6
FE595 Features A. B. C. D. E. F. Button Keypad Key Override Thumbturn Outside Knob/Lever Inside Knob/Lever A. Button 1. Press to turn on backlight. 2. Press to clear an incorrect code entry. D. Thumbturn Switches between locked and unlocked. (See below.) B. Keypad 1. Use to unlock the lock by entering a valid four-digit user code. 2. Use to program the lock. (See page 8.) E. Outside Knob/Lever Always rotates. Only retracts latch when lock is unlocked. C. Key Override (See page 10.) F.
PAGE 7
FE595 Lock Operation Continued To Unlock the Lock (While thumbturn is in locked position) a. Enter a valid four-digit user code. (See note.) button will flash green b. The c. Rotate outside knob/lever within five seconds to open door. d. After five seconds, the lock will automatically relock. b a NOTE: The lock has two unique preset user codes that are printed on the front of this guide and back of keypad assembly. c FE595 Changing the Battery For low battery indications, see page 11.
PAGE 8
Programming for All Models Label is located on front of guide and back of keypad assembly. Four-Digit User Codes (4DUC) • Activates lock • Can be changed • Up to 19 user codes • Won't program lock Six-Digit Programming Code (6DUC) Programming Code: 123456 User Code A: 4321 S/N: 1-00000000 • Programs lock • Can be changed User Code B: 5678 Model: BE365 • Won't operate lock Example Schlage Button (on front of lock) • • • • • Lights orange while in programming mode.
PAGE 9
Enable/disable Turn Lock feature (BE365 ONLY) (preset is enabled) NOTE: When Turn Lock feature is disabled, you must enter a valid user code to extend the bolt. 6DPC Create a temporary code (house sitter, plumber, etc.) 1. Add New User Code: 6DPC New 4DUC Reenter New 4DUC 2. Give person his/her code, but keep a written copy for yourself. 3.
PAGE 10
Keeping Your Lock Secure Security Tips 1. Do not share your programming code with other people. 2. Write down your programming and user codes and keep them in a safe place. (Use the table below if desired.) 3. Give each person his/her own user code. You can have up to 19 user codes. 4. If you don't remember or don't know who has a user code, you can delete all the user codes. (See page 8.
PAGE 11
Troubleshooting Guide Problem Beeps* Lights 2 1 High, 1 Low Red Green then Red None None There is a delay before unlock after a valid 4DUC is entered. High/Low, then 1 Red then Green blinking red but no codes have been entered. None Quick Red Blinking High/Low Red 2 Red Cannot delete a 4DUC. 2 Red Cannot change 6 digit programming code (6DPC). 2 Red Cannot delete all user codes. 2 Red Lock will not stay in programming mode. 2 Red None None Turn Lock Feature is disabled.
PAGE 12
Emergency Lock Override If the outside thumbturn does not freely rotate or the lock is malfunctioning, you can enable the emergency override feature. When emergency override is engaged, a key must be used to extend/retract the deadbolt. a. Remove screws and thumbturn assembly. b. Disconnect and remove battery. c. Use screwdriver to rotate slot on mounting plate to "LOCKOUT" position. NOTE: You may need to have your lock repaired or replaced.