Installation Guide

September 1999
19
Door and Jamb Preparation for Schlage Hardware
LOCK SERIES INDEX OF TEMPLATE SHEETS
Door Edge Door Wood or
Function Description Flat Bev. Thickness Composite Metal
1¹⁄₈” (29mm) Faceplate, 1” (25mm) housing x x S883 S882
1¹⁄₈” (29mm) Faceplate, ¹⁄₂” (13mm) rabbeted, strike included x S887
S290 Dummy trim, surface mounted Any S884
S200
SERIES
S200-Series Locks Door Template Number
S210, S251
S270, S280
Number Description Wood Metal
10-250 10-001 and 10-055 combination J907 J908
S200-Series Standard Strike Jamb
Template Number
1³⁄₈” - 2”
(35mm-51mm)
1³⁄₈” - 2”
(35mm-51mm)
Note: Whenever backset options are listed at the bottom of a template sheet, backset must be indicated by the suffix letter as follows:
A= 1³⁄₄” (44mm) backset B = 2” (51mm) backset C = 2³⁄₈” (60mm) backset D = 2³⁄₄” (70mm) backset
E= 3³⁄₄” (95mm) backset F = 5” (127mm) backset G = Other (specify)
Example: S883-C (S200-Series lock template #883 with 2³⁄₈” (60mm) backset)
Note:
See strike template index for optional strikes.