Datasheet

- subject to alterations -
DUX Schaltgeräte GmbH Tel.: [phone] Rechtsform: GmbH
Schönbachstraße 93 Fax: [phone] Sitz Leipzig, HRB Leipzig 6150, Geschäftsführer: Dipl.-Ing. Frank Podszuweit
D-04299 Leipzig e-mail:[e-mail] http://www.dux.de, Sach-Nr.: Datasheet_S_789-602_080624.doc
Data Shee
t
Date: 23.06.2008
S_789-602 4 Channel Radio Receiver, 4 changeover contacts, 8 A (WAGO 789-602)
Description
The Radio Receivers in the modular installation housing is designed for switching
of 4 individual loads (e.g. lamps) via radio sensors and push-buttons which are
based on Enocean Radio Technology.
Transmission is on a european-wide harmonized transmission band of 868 MHz.
The system is specially dedicated for flexible, pluggable building or industrial
automation because the expenditure for new or reconfiguring of installations is
minimized.
The Radio Receiver is compatible to wireless sensors of different manufacturers.
The sensors must be based on EnOcean PTM or STM transmitters.
One receiver could be operated from up to 40 transmitters, each channel from
up to 10 transmitters. The assignment between sensor and output has to be
teached once during commissioning, the assignments are stored mains-failure
protected in the NV-Ram of the Receiver.
Mixed operation of PTM and STM Modules is possible. One sensor could be
assigned to multiple outputs (1:n); multiple transmitters could be assigned to
one output channel (n:1).
Loads are operated via 4 relays with changover contacts. The max. permissible
load per contact is 8A.
Technical Data
Supply Voltage: DC 24 V / -15%...+20% / 90 mA (internal)
No. of channels (outputs): 4
No. of receive channels: 40 (10 per output)
Max. output current (per channel): 8 A, AC1
Max. permissible load acc. to EN 60669-2-1 max. 1840 W, incandescent lamps
max. 1400 W, halogen lamps
max. 120 VA, iron core transformer
max. 2 A, motor load
Max. switching frequency: < 5 Hz
Delay time: < 100 ms, transmitter/output command typ. 40-70 ms
Switching voltage: AC 230V
Fusing of loads: wire breaker, max. 16 A
Potential bonding: supply/ antenna - -
supply / contacts 4 kV
rms
channel / channel 2,2 kV
rms
open contact 1 kV
rms
Ambient temperature: 0°C...+55°C
Storage temperature: -25°C...+85°C
Relative humidity: 85 % without condensation
Pollution degree : 2
Degree of protection: IP 20
Mounting position: optional
Dimensions (WxHxD): (70 x 55
*
x 90) mm
*
from upper edge of DIN 35 rail
Weight: 152.6 g
wire connection: CAGE CLAMP® Wago series 236 0.08-2.5 mm
2
/ AWG 28-12
Stripped length: 5-6 mm / 0.22 in
Housing: modular installation housing DIN 43880
Mounting: DIN rail acc. to EN 50022
Approvals: KEMA, acc. to EN 60669-2-1:1996
– All rights reserved by WAGO –