Installation Guide

WARRANTIES 35
Schluter
®
-Systems Lifetime Thin-Set System Extended Limited Warranty
LIMITED WARRANTY COVERAGE: Subject to the conditions and limitations as stated in this Lifetime Thin-Set System Extended Limited Warranty (the
“Limited Warranty”), Schluter Systems warrants that a Thin-Set System (defined hereafter) will be free from manufacturing defects and will perform as described in
the applicable installation handbook(s) and/or technical data sheet(s) (collectively, the “Written Materials
1
” ) for the lifetime (defined hereafter) of such Thin-Set System
when installed in a Residential or Commercial application (defined hereafter) and used in accordance with the terms and conditions of the Written Materials and industry
standard guidelines that are not in conflict with the Written Materials in effect at the time of installation. In order to extend warranty coverage for Schluter
®
DITRA
®
or
DITRA
®
-XL uncoupling membranes, Schluter
®
-Shower System, Schluter
®
KERDI
®
or KERDI
®
-DS waterproofing membranes, or Schluter
®
DITRA-HEAT
™
or Schluter
®
DITRA-HEAT-DUO
™
uncoupling membrane to lifetime coverage under this Lifetime Thin-Set System Extended Limited Warranty, Owner must complete and submit the
Thin-Set System Registration to Schluter Systems, available at www.schluter.com, or submit proof of purchase and installation information (including installation date,
installer’s name and address) to Schluter Systems at the address provided hereafter within ninety (90) days of installation.
For the purposes of this Limited Warranty, a “Thin-Set System” is defined as Schluter
®
DITRA
®
or DITRA
®
-XL uncoupling membranes, Schluter
®
-Shower System,
Schluter
®
-KERDI
®
-BOARD within a Schluter
®
-Shower System, Schluter
®
KERDI
®
or KERDI
®
-DS waterproofing membranes, or Schluter
®
DITRA-HEAT™ or Schluter
®
DITRA-HEAT-DUO™ uncoupling membrane installed with Schluter SET
™
, Schluter ALL-SET
™
, or Schluter FAST-SET
™
thin-set mortar; “Owner” is defined as the
original end user of the property in which a Thin-Set System is installed; “Lifetime” is defined as that period of time that the original Thin-Set System installation remains
unchanged and under the ownership of the Owner; “Residential” applications are defined to include Thin-Set System installations in single family detached residential
dwellings; and “Commercial” applications are defined to include Thin-Set System installations in multi-family residential dwellings (e.g., apartments, condominiums,
cooperatives, and timeshares). Thin-Set System installations in public places, commercial establishments and other applications may be afforded lifetime coverage
under this Limited Warranty on a case by case basis as determined by the Schluter Systems Technical Services Director.
This Limited Warranty is only applicable to installations in the United States of America and Canada. Schluter Systems is not responsible or liable under any
circumstances for determining the suitability of a Thin-Set System for the Owner’s intended purpose. It is the responsibility of the Owner to consult with an experienced
and professional installer to ensure the suitability of a Thin-Set System, subfloor/substrate and all building materials in the installation and that the Written Materials are
followed properly.
RESOLUTION: If a Thin-Set System is installed and used in accordance with the terms and conditions as described hereinabove and such Thin-Set System is proven
defective within the applicable warranty term, the Owner’s exclusive remedy and the sole obligation of Schluter Systems, at its election, shall be to (a) reinstall or
replace the failed portion of the Thin-Set System or (b) pay an amount not to exceed the original square foot cost of the installation of the Thin-Set System verified to
be defective. Due to conditions beyond the control of Schluter Systems (e.g., color and shade availability, discontinuation, normal wear and tear), Schluter Systems
cannot guarantee or warrant an exact match to the specific tile, stone, or other flooring materials used in the original installation. In such event, substantially similar
materials may be substituted.
EXCLUSIONS FROM COVERAGE: This Limited Warranty excludes and in no event shall Schluter Systems have any liability for any indirect, special, incidental,
punitive, exemplary, or consequential damages, including lost profits, arising out of or otherwise connected to the failure of a Thin-Set System, regardless of any strict
liability or active or passive negligence of Schluter Systems, and regardless of legal theory, whether in contract, tort, extra-contractual or other. This Limited Warranty
further excludes any loss or damage arising out of or otherwise connected to: acts of war, terrorism, fire, explosion, natural disaster, acts of God, any failure to comply
with the Written Materials, inadequate subfloor/substrate, improper preparation or other failure of subfloor/substrate, faulty or negligent penetration of a Thin-Set
System or subfloor/substrate, intentional acts of destruction, structural failure, misuse of or failure to maintain a Thin-Set System, normal wear and tear, scratches,
dents, corrosion or discoloration (whether caused by excessive heat, chemical cleaning products, abrasive agents or otherwise), efflorescence and shading which are
a natural occurrence with cementitious materials and are not considered a defective condition for the purposes of this Limited Warranty, variations of texture, color or
shade from those on product samples, packaging materials or other marketing materials, or other causes unrelated to a Thin-Set System (e.g. excess point loading,
overvoltage). This Limited Warranty excludes exterior, submerged and steam room applications and further excludes applications using glass tile, resin-backed tile,
and/or moisture sensitive stone unless specifically approved in writing on a case by case basis by the Schluter Systems Technical Services Director. Schluter
®
DITRA-
HEAT™-E-HK heating cables and Schluter
®
DITRA-HEAT™-E thermostats are specifically excluded from coverage under this Limited Warranty. Any substitution of a
non-Schluter Systems product for a Schluter Systems component in a Thin-Set System voids this Limited Warranty.
DISCLAIMER: There are no warranties beyond this expressed warranty as stated herein. To the extent permitted by law, all other warranties, representations or
conditions, expressed or implied, are hereby disclaimed and excluded, including but not limited to the implied warranties of MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE (as limited to such purposes as described in the Written Materials) or arising from a course of dealing, usage of trade or otherwise by law.
ANY IMPLIED WARRANTIES ARISING BY OPERATION OF LAW ARE LIMITED IN DURATION TO THE TERM OF THIS LIMITED WARRANTY. NO REPRESENTATION,
PROMISE, AFFIRMATION OR STATEMENT BY ANY EMPLOYEE OR AGENT OF SCHLUTER SYSTEMS WILL BE ENFORCEABLE AGAINST SCHLUTER SYSTEMS
UNLESS IT IS SPECIFICALLY INCLUDED IN THIS LIMITED WARRANTY OR AUTHORIZED IN WRITING BY THE SCHLUTER SYSTEMS TECHNICAL SERVICES
DIRECTOR. This Limited Warranty is given in lieu of any other warranty, whether expressed or implied. The remedies contained herein are the only remedies available
for breach of this Limited Warranty. Schluter Systems excludes and in no event shall have any liability for any indirect, special, incidental, punitive, exemplary, or
consequential damages, including lost profits, arising out of or otherwise connected to failure of a Thin-Set System. This Limited Warranty extends only to the Owner
and is not transferable or assignable unless authorized by written agreement and signed by the Schluter Systems Technical Services Director or otherwise prohibited
by specific state or provincial law. This Limited Warranty gives you specific legal rights; some states and provinces do not allow disclaimers or other restrictions of
implied warranties; some of the above disclaimers may not apply to you. No changes or modifications of any terms or conditions of this Limited Warranty are
permitted unless duly authorized in writing by the Schluter Systems Technical Services Director. This Limited Warranty shall supersede and replace any and
all prior oral or written warranties, agreements, or other representations made by or on behalf of Schluter Systems relative to a Thin-Set System or the application of a
Thin-Set System and shall apply to any installation occurring on or after March 13, 2017. For the most current information and materials regarding Schluter Systems
warranties and programs, please visit https://www.schluter.com/schluter-us/en_US/downloadfiles.
MAKING A CLAIM: To make a claim under this Limited Warranty, the Owner must provide Schluter Systems with written notice within thirty (30) days of any alleged
defect in a Thin-Set System covered by this Limited Warranty, together with date and proof of purchase of such Thin-Set System and/or all of its components and name
and address of all installers and all invoices related to the original installation, failing which this Limited Warranty shall have no legal effect . Schluter Systems reserves
the right at its election and as a condition of this Limited Warranty to inspect the alleged failed and/or defective Thin-Set System.
All U.S. Claims shall be sent to: All Canadian Claims shall be sent to:
Schluter Systems L.P. Schluter Systems (Canada), Inc.
Attn: Warranty Claims Dept. Attn: Warranty Claims Dept.
194 Pleasant Ridge Road 21100 chemin Ste-Marie
Plattsburgh, NY 12901-5841 Ste-Anne-de-Bellevue, QC H9X 3Y8