Use and Care Manual

14
SHOWER SYSTEM
Schluter
®
-KERDI-DRAIN
STAINLESS STEEL FLANGE — 2" or 3" OUTLET
2" (50 mm) drain outlet
Material Item No.
KD2 FLK E
KD2 FLK ETH
3" (75 mm) drain outlet
Material Item No.
KD3 FLK E
Additional components included
Inside
corners
4x
Outside
corners
2x
Pipe seal
(3/4" - 20 mm)
1x 1x
Threaded
No-hub
No-hub
Flange measurements
Stainless steel
2" (50 mm) no-hub outlet 3" (75 mm) no-hub outlet
A 9-27/32" - 250 mm 9-27/32" - 250 mm
B 4-1/2" - 115.4 mm 4-1/2" - 114 mm
C 2-13/32" - 61.3 mm 3-7/16" - 87.4 mm
D 2-13/32" - 60.6 mm 3-5/16" - 84.2 mm
E 3-11/32" - 85 mm 3-7/16" - 87.4 mm
F 53/64" - 21 mm 1-5/32" - 29.4 mm
Mixing
valve seal
(4-1/2" - 114 mm)
KERDI-FIX
sealing and bonding
compound
(3.38 oz – 100 ml)
1x
When using a flange with 3" outlet, a 6"
grate is recommended.
i