Use and Care Manual

7
SHOWER SYSTEM
The support profiles are combined with either
the SHOWERPROFILE-WSL insert or the
SHOWERPROFILE-WSC insert.
Schluter
®
-SHOWERPROFILE-WSL is an
upright insert made of transparent polyurethane.
The insert is collapsible when stepped on or
rolled over with a wheelchair. The insert protrudes
1-5/32" (29 mm) above the profile surface. The
SHOWERPROFILE-WSL insert does not comply
with the Americans with Disabilities Act (ADA),
since it exceeds the allowable height of a vertical
transition despite being collapsible. Please
check with local code officials for acceptance
on projects where ADA guidelines must be
observed before installation.
Schluter
®
-SHOWERPROFILE-WSC is a semi-
circular insert made of semi-rigid PVC. The
insert creates an inconspicuous transition from
the shower area to the adjoining space and a
5/8" (16 mm) –wide visible surface. The insert
protrudes 3/64" (1.2 mm) above the profile
surface. The SHOWERPROFILE-WSC insert
complies with the Americans with Disabilities
Act (ADA).
Material Properties and Areas of
Application
The SHOWERPROFILE-WS/-WSK support
profiles feature an anodized aluminum layer
that retains uniform appearance during normal
use. The surface, however, is susceptible to
scratching and wear and may be damaged
by grout or setting material. Cementitious
materials, in conjunction with moisture, become
alkaline. Since aluminum is sensitive to alkaline
substances, exposure to the alkali (depending
on the concentration and duration of exposure)
may result in corrosion (aluminum hydroxide
formation). Therefore, it is important to remove
mortar or grout residue immediately from visible
surfaces. In addition, ensure the profile is solidly
embedded in the setting material and that all
cavities are filled to prevent the collection of
alkaline water.
The SHOWERPROFILE-WSL insert is made of
highly flexible polyurethane.
The SHOWERPROFILE -WSC insert is made of
semi-rigid PVC.
The inserts can withstand chemical stresses
typically encountered in tiled environments.
Maintenance
SHOWERPROFILE-WS/-WSK support profiles
require no special maintenance or care and
are resistant to mold and fungi. In the case
of anodized aluminum, do not use abrasive
cleaning agents. The SHOWERPROFILE-WSC/
-WSL inserts are specifically treated to resist
the growth of fungi and bacteria and require no
special maintenance or care.
Schluter
®
-KERDI-FIX Technical Data
Color Grey or bright white
Basic raw material Silyl-modified polymer (SMP)
Specific weight Approx. 93.6 lb/ft
3
(1.5 g/ml)
Solvent content 0%
Isocyanate content 0%
Dry materials content Approx. 100%
VOC emissions 0.0 mg/m
3
Shear strength beech wood/beech wood Approx. 435 psi (3 N/mm
2
)
Shear strength aluminum/aluminum Approx. 290 psi (2 N/mm
2
)
Elongation at failure Approx. 200%
Skinning About 10 minutes
Curing 1/8" (3 mm) per 24 hours
Permissible total movement About 20%
Processing temperatures Don’t install at temperatures below 40 ºF (5 ºC)
Temperature stability
-40 ºF (-40 ºC) to 212 ºF (100 ºC), temporarily
356 ºF (180 ºC) [max. 30 minutes]
Moisture resistance Very good
Frost ability Not sensitive to frost
Cartridge volume 9.81 fl oz (290 ml)
Estimated coverage
5" (12.7 cm) connection
to fixed building elements
12' 10" (3.9 m) per cartridge
1/4" (6 mm) bead 30' 1" (9.2 m) per cartridge
Adhesive/Sealant
Any protrusions through the KERDI membrane
can be treated with KERDI-FIX, or equivalent
sealant, to ensure a fully waterproof assembly.
Application and Function
8.3 Schluter
®
-KERDI-FIX is a single-
component, waterproof sealing and bonding
compound with a silane-modified polymer base,
which can be used in various applications. In
conjunction with KERDI, KERDI-FIX can be used
to waterproof pipe and valve protrusions in the
Schluter
®
- Shower System. KERDI-FIX is used
to bond the KERDI membrane to the stainless
steel KERDI-DRAIN bonding flange. KERDI-FIX
can also be used to bond KERDI to building
elements such as bathtubs, window elements
and door frames.
Material Properties and
Areas of Application
KERDI-FIX is odorless, weather- and UV-resistant.
The product is elastomeric, free of solvents,
and provides a strong bond to most materials,
including wood, stone, concrete, metal, glass,
and many synthetic materials. KERDI-FIX can be
painted over with most alkyd resins or dispersion
paint types. The suitability of the material must
be verified based on the anticipated chemical,
mechanical, and/or other stresses. KERDI-FIX is
not recommended in or around swimming pool
applications.
KERDI-FIX has been evaluated according to the
"Standard Method for the Testing and Evaluation
of Volatile Organic Chemical Emissions from
Indoor Sources Using Environmental Chambers,
Version 1.1" for California Specification 01350
and found to comply with the VOC requirements.
California Specification 01350 is referenced by
various green building standards and rating
systems.
Maintenance
Storage
Unopened packages of KERDI-FIX can be
stored in a cool location that is above freezing
temperatures for up to 18 months.
Once the cartridge has been opened, the
material has a limited shelf life.
System Installation
For complete installation guidelines and
warranty criteria for shower applications,
please contact Schluter
®
-Systems at 800-
472-4588 (USA) or 800-667-8746 (Canada)
to receive a copy of the Schluter
®
-Shower
System Installation Handbook and a
step-by-step installation video. To download
a PDF version of the Handbook or to view
the installation video online, please visit
www.schluter.com.
8.3 Schluter
®
-KERDI-FIX