Use and Care Guide

8
WALL AND COUNTERTOP PROFILES
Stainless steel
= H
Stainless Steel
2.10 Schluter
®
-QUADEC
H =
mm - in.
Item No.
Stainless
steel 304
(1.4301 = V2A)
(E)
Brushed
stainless
steel 304
(1.4301 = V2A)
(EB)
Stainless steel
304 (1.4301 = V2A)
square check
(ES1)
Stainless steel
304 (1.4301 = V2A)
leather texture
(ES2)
4.5 - 3/16 Q 45 E - - -
6 - 1/4 Q 60 E Q 60 EB - -
7 - 9/32 Q 70 E Q 70 EB
8 - 5/16 Q 80 E Q 80 EB Q 80 ES1 Q 80 ES2
9 - 11/32 Q 90 E Q 90 EB - -
10 - 3/8 Q 100 E Q 100 EB Q 100 ES1 Q 100 ES2
11 - 7/16 Q 110 E Q 110 EB Q 110 ES1 Q 110 ES2
12.5 - 1/2 Q 125 E Q 125 EB Q 125 ES1 Q 125 ES2
14 - 17/32 Q 140 E Q 140 EB - -
15 - 9/16 Q 150 E Q 150 EB - -
H =
mm - in.
Connector for
stainless steel
profiles
6 - 1/4 V/RO 60 E
8 - 5/16 V/RO 80 E
10 - 3/8 V/RO 100 E
11 - 7/16 V/RO 110 E
12.5 - 1/2 V/RO 125 E
Length supplied: 8' 2-1/2" — 2.5 m
Accessories Item No.
End cap, outside/inside corner EV/ profile item number*
Aluminum
= H
Aluminum
2.10 Schluter
®
-QUADEC
H =
mm - in.
Item No.
Satin
anodized
aluminum
(AE)
Polished
chrome
anodized
aluminum
(ACG)
Satin
nickel
anodized
aluminum
(AT)
Brushed
antique bronze
anodized
aluminum
(ABGB)
4.5 - 3/16 Q 45 AE Q 45 ACG Q 45 AT -
6 - 1/4 Q 60 AE Q 60 ACG Q 60 AT Q 60 ABGB
8 - 5/16 Q 80 AE Q 80 ACG Q 80 AT Q 80 ABGB
10 - 3/8 Q 100 AE Q 100 ACG Q 100 AT Q 100 ABGB
12.5 - 1/2 Q 125 AE Q 125 ACG Q 125 AT Q 125 ABGB
15 - 9/16 Q 150 AE - - -
20 - 3/4 Q 200 AE - - -
Accessories Item No.
End cap, outside/inside corner EV/ profile item number*
H =
mm - in.
Connector
for aluminum
profiles
6 - 1/4 V/Q 60
8 - 5/16 V/RO 80
10 - 3/8 V/RO 100
12.5 - 1/2 V/RO 125
Inside Corner Outside Corner
Note: The same corner piece can be used to produce
a 90° inside corner and a 90° outside corner. It can also
be used as an end cap.
How to order corners:
* To complete the item number for corners, add the corresponding profile
item number (e.g., EV/ Q 80 E).
Length supplied: 8' 2-1/2" — 2.5 m
2.10 Schluter
®
-QUADEC
Length = 3.05 m - 10'
H =
mm - in.
Item No.
Polished
chrome
anodized
aluminum
(ACG)
8 - 5/16 Q 80 ACG/300
10 - 3/8 Q 100 ACG/300
12.5 - 1/2 Q 125 ACG/300