SHOWE R SY STE M INNOVATIVE SOLUTIONS FOR CERAMIC AND STONE TILE INTEGRATED BONDED WATERPROOFING SYSTEM FOR TILED SHOWERS The Schluter®-Shower System is an integrated family of products that together form a fully bonded, watertight assembly for tiled showers. Unlike shower pan liners in conventional assemblies, bonded waterproof membranes, such as Schluter®KERDI, bond directly to the mortar bed and protect it from becoming saturated with regular use.
SHOWER SYSTEM Prefabricated Shower Substrates 8.3 Schluter®-KERDI-SHOWER-T/-TS/-TT/-LT/-LTS Property Density Compressive Strength1 Maximum Service Temperature 1 Method Value ASTM D3575 ASTM D1621 - 3.75 lb/ft3 (60 Kg/m3) 80 psi (552 kPa) 175 °F (79 °C) Compressive strength measured at 10% deflection of foam 8.3 Schluter®-KERDI-SHOWER-R 8.3 Schluter -KERDI-SHOWER -T/-TS/-TT ® Property Density Maximum Service Temperature Method Application and Function 8.3 Schluter®-KERDI-SHOWER -R/-CB 8.
SHOWER SYSTEM provides enough KERDI-BOARD to cover up to 101 ft² (9.4 m²) of wall area. Material Properties and Areas of Application KERDI-SHOWER-T/-TS/-TT/-LT/-LTS/-R prefabricated substrates are manufactured using lightweight expanded polystyrene. The products require no special disposal and can be recycled. No CFCs or HCFCs are present in either the products or in the manufacturing process. The polystyrene foam trays and the shower ramp each have a density of 3.
SHOWER SYSTEM KERDI-BOARD is suitable for: creating tile substrates on masonry walls, wood or metal framing, and other finished wall surfaces; creating straight or curved partition walls; creating straight or curved bathtub and shower surrounds; concealing pipes and columns; as well as creating bathtub platforms, vanities, storage shelves, countertops, and various other bathroom structures. The boards are simply cut to size with a utility knife.
SHOWER SYSTEM integrated bonding flange drains when removal of the clamping ring drain is not practical (e.g., when they are set in concrete slabs). Adaptor kits are suitable for both mortar beds and KERDISHOWER-T/-TS/-TT shower tray applications.
SHOWER SYSTEM aluminum. The covering support is stainless steel 304 (1.4301 = V2A) with KERDI laminated on the surface. The KERDI-LINE channel body is formed using stainless steel 316 L (1.4404 =V4A) and features a bonding flange with a KERDI collar laminated on the surface. KERDI is a bonded waterproof membrane with a modified polyethylene (PEVA) with non-woven polypropylene fleece on both sides to anchor the membrane in the thin-set mortar. The frame and grates are made of stainless steel 316 L (1.
SHOWER SYSTEM The support profiles are combined with either the SHOWERPROFILE-WSL insert or the SHOWERPROFILE-WSC insert. Schluter ®-SHOWERPROFILE-WSL is an upright insert made of transparent polyurethane. The insert is collapsible when stepped on or rolled over with a wheelchair. The insert protrudes 1-5/32" (29 mm) above the profile surface.
SHOWER SYSTEM Product Item Numbers 8.3 Schluter®-KERDI-SHOWER-T Item No. KST965/1525 KST1220/1525 KST1220/1830 KST1525 KST1830 Tray with center drain placement Dimensions Perimeter height Drain placement 97 cm x 152 cm (38" x 60") 122 cm x 152 cm (48" x 60") 122 cm x 183 cm (48" x 72") 152 cm x 152 cm (60" x 60") 183 cm x 183 cm (72" x 72") 29 mm (1-1/8") 28 mm (1-3/32") 32 mm (1-1/4") 30 mm (1-3/16") 32 mm (1-1/4") center center center center center 8.3 Schluter®-KERDI-SHOWER-TS Item No.
SHOWER SYSTEM 8.1 Schluter®-KERDI Waterproofing membrane Item No. Roll width: 3' 3" – 1 m KERDI 200/5M KERDI 200/7M KERDI 200/10M KERDI 200/20M KERDI 200 Roll width: 6' 7" – 2 m KERDI 200200 Length Area Thickness 16' 5" – 5 m 23' – 7 m 33' – 10 m 65' 7" – 20 m 98' 5" – 30 m 54 ft2 – 5 m2 75 ft2 – 7 m2 108 ft2 – 10 m2 215 ft2 – 20 m2 323 ft2 – 30 m2 8 mil 8 mil 8 mil 8 mil 8 mil 98' 5" – 30 m 646 ft2 – 60 m² 8 mil 8.1 Schluter®-KERDI-DS Waterproofing membrane Item No.
SHOWER SYSTEM 1 6 2 3 4 5 Schluter®-KERDI-BOARD-KIT Includes 1 2 3 4 5 6 KERDI-BOARD KERDI-BAND KERDI-SEAL-PS KERDI-SEAL-MV KERDI-BOARD-ZT/-ZS KERDI-FIX Description Quantity Waterproofing building panel 1/2" x 48" x 38" (1.25 cm x 122 cm x 97 cm) = 101 ft2 (9.4 m²) Waterproofing strip 5" x 98' 5" (125 mm x 30 m) Pipe seal 1/2" (12.5 mm), 3/4" (20 mm) Mixing valve seal 4-1/2" (114 mm) Screws and washers Sealant 9.8 oz (290 ml) 8.1 Schluter®-KERDI-BAND Item No.
SHOWER SYSTEM 8.1 Schluter®-KERDI-KERS Preformed corner Item No. Thickness KERS 20L KERS 28L KERS 20R KERS 28R Packaging 4 mil 4 mil 4 mil 4 mil Left inside corner – 3/4" (20 mm) Left inside corner – 1-3/32" (28 mm) Right inside corner – 3/4" (20 mm) Right inside corner – 1-3/32" (28 mm) 8.1 Schluter®-KERDI-SEAL-PS Item No. KMS185/12 KMS185/20 KMS10185/12 KMS10185/20 Pipe seal with over-molded rubber gasket Pipe nipple opening diam.
SHOWER SYSTEM 8.
SHOWER SYSTEM Schluter®-KERDI-DRAIN ABS or PVC FLANGE — 2" or 3" OUTLET 2" (50 mm) drain outlet Material 3" (75 mm) drain outlet Item No. Material Item No. KD2 FLK ABS KD3 FLK ABS ABS ABS KD2 FLK PVC KD3 FLK PVC PVC PVC Additional components included 4x Inside corners 2x 1x 1x Pipe seal (3/4" - 20 mm) Outside corners Mixing valve seal (4-1/2" - 114 mm) Flange measurements ABS or PVC i When using a flange with 3" outlet, a 6" grate is recommended.
SHOWER SYSTEM Schluter®-KERDI-DRAIN STAINLESS STEEL FLANGE — 2" or 3" OUTLET 2" (50 mm) drain outlet 3" (75 mm) drain outlet Material Item No. Material Item No. KD2 FLK E KD3 FLK E No-hub No-hub KD2 FLK ETH Threaded Additional components included 4x Inside corners 2x Outside corners 1x 1x Pipe seal (3/4" - 20 mm) Mixing valve seal (4-1/2" - 114 mm) 1x KERDI-FIX sealing and bonding compound (3.
SHOWER SYSTEM Schluter®-KERDI-DRAIN-H ABS or PVC FLANGE — 2" OUTLET HORIZONTAL 2" (50 mm) drain outlet Material Item No. KDH2 FLK ABS ABS KDH2 FLK PVC PVC Additional components included 4x 2x Inside corners 1x 1x Pipe seal (3/4" - 20 mm) Outside corners Mixing valve seal (4-1/2" - 114 mm) Flange measurements ABS or PVC 2" (50 mm) horizontal drain outlet A B A D C E F 11-13/16" - 300 mm B 4-21/32" - 118.3 mm C 2-47/64" - 69.5 mm D 2-3/8" - 60.5 mm E 3-3/8" - 85.
SHOWER SYSTEM Schluter®-KERDI-DRAIN-A ADAPTOR KIT — 5-1/4" or 7-1/2" ADAPTOR RING Schluter®-KERDI-DRAIN ADAPTOR KITS are used to convert traditional clamping ring drains to integrated bonding flange drains when removal of the clamping ring drain is not practical. A stainless steel adaptor ring with an overmolded rubber gasket replaces the clamping ring and is sealed to the existing drain body using Schluter®-KERDI-FIX.
SHOWER SYSTEM Schluter®-KERDI-DRAIN GRATES FOR USE WITH FLANGES WITH 2" OUTLET 4" (100 mm) Grate ® W! Schluter -KERDI-DRAIN-STYLE NE PURE U.S. Patent No. D831,795 Brushed stainless steel Brushed nickel Brushed rose gold Brushed vintage gold Item No. Item No. Item No. Item No. Brushed classic gold Item No. KDIF4 GRK EB D8 KDIF4 GRK EBT D8 KDIF4 GRK EBRG D8 KDIF4 GRK EBVG D8 KDIF4 GRK EBCG D8 Matte black Cream Greige Stone grey Bronze Matte white Item No. Item No. Item No. Item No.
SHOWER SYSTEM Stainless steel Stainless steel Chrome Oil-rubbed bronze Item No. Item No. Item No. KD4 GRK E KD4 GRK EP KD4 GRK EOB Nickel Rose gold Vintage gold Classic gold Item No. Item No. Item No. Item No. KD4 GRK ET KD4 GRK ERG KD4 GRK EVG KD4 GRK ECG Anodized aluminum Brushed nickel anodized aluminum Brushed copper anodized aluminum Brushed brass anodized aluminum Item No. Item No. Item No.
SHOWER SYSTEM Schluter®-KERDI-DRAIN GRATES FOR USE WITH FLANGES WITH 2" OUTLET 4" (100 mm) Grate Tileable grate Tileable grate Item No. KD4 GRK ECS Patent pending Contents 1x 1x Spacer Tileable covering support GRATES FOR USE WITH FLANGES WITH 2" or 3" OUTLET 6" (150 mm) Grate Stainless steel Stainless steel - 6" square Stainless steel - 6" round Item No. Item No.
SHOWER SYSTEM Schluter®-KERDI-DRAIN DRAIN KITS — ABS or PVC FLANGE - 2" OUTLET - STAINLESS STEEL GRATE Schluter®-KERDI-DRAIN ABS - 2" (50 mm) PVC - 2" (50 mm) 4" (100 mm) square grate Stainless steel KD2/ABS/E KD2/PVC/E Contents 1x 1x Grate and frame Flange 4x Inside corners 2x Outside corners 1x Height adjustment collar 1x Pipe seal (3/4" - 20 mm) 1x Lateral adjustment ring 1x Mixing valve seal (4-1/2" - 114 mm) ADAPTOR KIT — 5-1/4" ADAPTOR RING - 4" STAINLESS STEEL GRATE 5-1/4" (133
SHOWER SYSTEM Schluter®-KERDI-DRAIN ABS or PVC FLANGE — 2" or 3" OUTLET - WITHOUT SEALS AND CORNERS 3" (75 mm) drain outlet 2" (50 mm) drain outlet Material 1 Unit 10 Units Item No. Item No. Material Item No. KD3/ABS/FL KD2/ABS/FL KD2/ABS/FL10 ABS ABS KD3/PVC/FL KD2/PVC/FL KD2/PVC/FL10 PVC PVC HORIZONTAL ABS or PVC FLANGE — 2" OUTLET - WITHOUT SEALS AND CORNERS 2" (50 mm) drain outlet Material Item No.
SHOWER SYSTEM Schluter®-KERDI-DRAIN 10 PACKS — ABS OR PVC FLANGE - 2" OUTLET 2" (50 mm) drain outlet Additional components included Material Item No. 40x Inside corners KD2 FLK ABS 10 20x Outside corners ABS 10x Pipe seal (3/4" - 20 mm) KD2 FLK PVC 10 10x Mixing valve seal (4-1/2" - 114 mm) PVC Note: 10 packs are packaged in bulk, not individually boxed. 10 PACKS — ABS FLANGE - 5-1/4" ADAPTOR RING 5-1/4" (133.4 mm) adaptor ring Additional components included Flange and ring Item No.
SHOWER SYSTEM Schluter®-KERDI-DRAIN 6" SQUARE CLEAN OUT COVER The Schluter®-KERDI-DRAIN Clean Out Cover is a 6” stainless steel cover available for installations where the KERDIDRAIN bonding flange is to be used in a cleanout application. Clean out cover 6" Item No. Finish KD-GR6C-E Stainless steel TAMPER PROOF SCREWS Schluter ®-KERDI-DRAIN Tamper Proof Screws are designed as a high security accessory for the KERDI-DRAIN.
SHOWER SYSTEM Note: There are multiple selections to be made for this product. Begin by selecting the appropriate channel body length then proceed to grate selection accordingly, keeping in mind there two frame height options for the perforated and closeddesign grates.
SHOWER SYSTEM Schluter®-KERDI-LINE GRATE ASSEMBLY - BRUSHED STAINLESS STEEL CONTENTS 1x 1x Grate 6 design options: • Closed-design • Perforated • Frameless tileable • CURVE • FLORAL • PURE Closed (A) 3/8" 10 mm Grate frame with height adjustment spacers. See product tables for frame height options (not included with frameless tileable grate).
SHOWER SYSTEM Schluter®-KERDI-LINE GRATE ASSEMBLY - CHROME Closed (A) 3/8" 10 mm 1-27/32" 47 mm Perforated (B) 3/8" 10 mm 2-1/8" - 54 mm =H =H 2-29/32" - 74 mm 2-29/32" - 74 mm Grate assemblies - Chrome 3/4" (19 mm) frame height for 1/8" to 9/16" (3 mm to 15 mm) -thick coverings Length = in. - cm 19-11/16 23-5/8 27-9/16 31-1/2 35-7/16 39-3/8 43-5/16 47-1/4 - 50 - 60 - 70 - 80 - 90 - 100 - 110 - 120 Frameless Tileable (D) Closed (A) Perforated (B) Item No.
SHOWER SYSTEM Schluter®-KERDI-LINE-STYLE GRATE ASSEMBLY - BRUSHED STAINLESS STEEL STYLE DESIGNS CURVE FLORAL 2-29/32" (74 mm) 4 2-29/32" (74 mm) 4 =H PURE 2-29/32" (74 mm) =H 2-1/8" (54 mm) 2-1/8" (54 mm) 2-1/8" (54 mm) Grate assemblies - Brushed stainless steel 29/32" - 23 mm frame height for 1/4" - 11/16" (6 - 18 mm) -thick coverings Length = in. - cm 19-11/16 23-5/8 27-9/16 31-1/2 35-7/16 39-3/8 43-5/16 47-1/4 - 50 - 60 - 70 - 80 - 90 - 100 - 110 - 120 CURVE1 FLORAL2 PURE3 Item No.
SHOWER SYSTEM Schluter®-KERDI-LINE PERFORATED GRATE WITH LOCKING MECHANISM The Schluter®-KERDI-LINE perforated grate assembly (B) with 3/4" (19 mm) frame height is available with a locking mechanism for applications where tamper resistance is required. Perforated grate assembly with locking mechanism Length = in. - cm 19-11/16 23-5/8 27-9/16 31-1/2 35-7/16 39-3/8 43-5/16 47-1/4 51-3/16 55-1/8 59-1/16 62-15/16 66-7/8 70-13/16 Item No.
5 mm) or 0 mm) SHOWER SYSTEM 14.1 Schluter®-SHOWERPROFILE-SA Item No. H = in. - mm L = 47-1/4" - 1.2 m SPSA 50 EB/120 L = 63" - 1.6 m SPSA 50 EB/160 L = 78-3/4" - 2 m SPSA 50 EB/200 H = 3/16" (5 mm) or 3/8" (10 mm) 3/8" (10 mm) 3/8" (10 mm) (12.5 mm) 1/4 - 6 1-3/16 - 30 3/16 - 5 1/4 - 6 1-1/2 - 38 3/16 - 5 1/4 - 6 1-13/16 - 46 H = in. - mm L = 47-1/4" - 1.2 m SPSB 100 EB/120 SPSB 125 EB/120 L = 63" - 1.
SHOWER SYSTEM 17.1 Schluter®-SHELF-E Triangular corner shelf 210 mm - 8-1/4" MBW 210 mm - 8-1/4" 210 mm - 8-1/4" 210 mm - 8-1/4" MGS EB Schluter®-SHELF-E - FLORAL MGS EB Schluter®-SHELF-E - CURVE Item No. Finish Item No.
SHOWER SYSTEM 17.1 Schluter®-SHELF-E Pentagonal corner shelf 195 mm - 7-11/16" MBW 195 mm - 7-11/16" 75 mm - 3" MBW 195 mm - 7-11/16" 75 mm - 3" 195 mm - 7-11/16" MGS EB EB 75 mm - 3" 75 mm - 3" TSBG Schluter®®-SHELF-E - FLORAL Item No. No. Item Finish Finish SES2 D5 D5 EB EB SES2 Brushed stainless stainless steel steel Brushed SES2 D5 D5 MBW MBW SES2 Matte white white Matte SES2 D5 D5 MGS MGS SES2 Matte black black Matte TSC TSBG Schluter®-SHELF-E - CURVE Item No.
SHOWER SYSTEM 17.1 Schluter®-SHELF-E Quadrilateral corner shelf 62 mm - 2-7/16" 62 mm - 2-7/16" MBW MBW 295 mm - 11-5/8" 295 mm - 11-5/8" EB EB MGS MGS 154 mm - 6-1/16" 154 mm - 6-1/16" TSBG Schluter®-SHELF-E - FLORAL TSBG Schluter®-SHELF-E - CURVE Item No. Finish Item No.
SHOWER SYSTEM 17.1 Schluter®-SHELF-N Niche shelf 87 mm - 3-7/16" 87 mm - 3-7/16" 300 mm - 11-13/16" 300 mm - 11-13/16" EB MBW MGS Schluter®-SHELF-N - FLORAL MBW MGS TSBG TSC TSSG TSOB Schluter®-SHELF-N - CURVE Item No. Finish Item No.
SHOWER SYSTEM 17.1 Schluter®-SHELF-W Wall shelf EB 115 mm - 4-1/2" 115 mm - 4-1/2" EB 300 mm - 11-13/16" 300 mm - 11-13/16" Schluter®-SHELF-W - FLORAL Schluter®-SHELF-W - CURVE Item No. Finish SWS1 D5 EB Brushed stainless steel SWS1 D5 MBW Matte white SWS1 D5 MGS Matte black SWS1 D5 TSBG Greige MBW MGS Item No.
SHOWER SYSTEM 1 7 3 3 8 6 2 4 6 5 4 1 5 2 7 8 Schluter®-KERDI-SHOWER-KIT Includes 2 3 4 5 6 7 8 KERDI-SHOWER-T/-TS/-TT KERDI-BOARD-SC KERDI-BOARD-SC KERDI 10 M KERDI-BAND KERDI-DRAIN KERDI-KERECK-F KERDI-SEAL-PS KERDI-SEAL-MV Shower Tray Shower Curb 48" x 6" x 4-1/2" Shower Curb 38" x 6" x 4-1/2" Waterproofing membrane 3' 3" x 33' = 108 ft2 Waterproofing strip 5" x 33' Flange with 2" (50 mm) outlet and stainless steel grate (E) 1 1 152 cm - 60" 97 cm - 38" 122 cm - 48" Grate finish AB
SHOWER SYSTEM 7 3 1 3 8 6 5 4 1 4 2 5 2 6 8 7 Schluter®-KERDI-SHOWER-KIT - WITHOUT THE GRATE Includes 1 2 3 4 5 6 7 8 KERDI-SHOWER-T/-TS/-TT KERDI-BOARD-SC KERDI-BOARD-SC KERDI 5 M KERDI 10 M KERDI 12 M KERDI-BAND KERDI-DRAIN Flange KERDI-KERECK-F KERDI-SEAL-PS KERDI-SEAL-MV 48" x 48" 38" x 60" 48" x 72" 72" x 72" Shower Tray Shower Curb 48" x 6" x 4-1/2" Shower Curb 38" x 6" x 4-1/2" Waterproofing membrane 3' 3" x 16' 5" = 54 ft2 Waterproofing membrane 3' 3" x 33' = 108 ft2 Waterproofing me
SHOWER SYSTEM 1 3 3 4 1 2 2 4 Schluter®-KERDI-SHOWER-KIT - WITHOUT THE DRAIN Includes 1 2 3 4 KERDI-SHOWER-T/-TS/-TT KERDI-BOARD-SC KERDI-BOARD-SC KERDI 5 M KERDI 10 M KERDI 12 M KERDI-BAND Description Shower Tray Shower Curb 48" x 6" x 4-1/2" Shower Curb 38" x 6" x 4-1/2" Waterproofing membrane 3' 3" x 16' 5" = 54 ft2 Waterproofing membrane 3' 3" x 33' = 108 ft2 Waterproofing membrane 3' 3" x 39' 4" = 128 ft2 Waterproofing strip 5" x 33' Tray size 48" 38" 38" 48" 72" 37 x x x x x 48" 60" 60"
SHOWER SYSTEM Schluter®-KERDI-TUBKIT 1 Item No.
Schluter®-Shower System 10-Year Limited Warranty LIMITED WARRANTY COVERAGE: Subject to the conditions and limitations as stated in this Schluter®-Shower System 10-Year Limited Warranty (the “Limited Warranty”), Schluter Systems warrants that its Schluter®-Shower System (the “Products”) will be free from manufacturing defects and will perform as described in the Schluter®-Shower System Installation Handbook and Schluter® Waterproofing Membranes Technical Data Sheet (collectively, the “Written Materials”1) fo
Schluter®-Systems Lifetime Thin-Set System Extended Limited Warranty LIMITED WARRANTY COVERAGE: Subject to the conditions and limitations as stated in this Lifetime Thin-Set System Extended Limited Warranty (the “Limited Warranty”), Schluter Systems warrants that a Thin-Set System (defined hereafter) will be free from manufacturing defects and will perform as described in the applicable installation handbook(s) and/or technical data sheet(s) (collectively, the “Written Materials1” ) for the lifetime (define
