Use and Care Manual

11
SHOWER SYSTEM
11
Schluter
®
-KERDI-TROWEL Trowel
Item No.
Notch Size Packaging
TRL-KER6 1/8" x 1/8" - 3 x 3 mm 6 units
TRL-KER 1/8" x 1/8" - 3 x 3 mm 1 unit
Hole diameter, ø = 7/8" - 22 mm
8.1 Schluter
®
-KERDI-SEAL-PS Pipe seal with over-molded rubber gasket
Item No.
Pipe nipple opening diam. Thickness Packaging
KMS185/12 1/2" – 12.5 cm 4 mil 1 unit
KMS185/20 3/4" – 20 cm 4 mil 1 unit
KMS10185/12 1/2" – 12.5 cm 4 mil 10 units
KMS10185/20 3/4" – 20 cm 4 mil 10 units
8.1 Schluter
®
-KERDI-SEAL-MV Mixing valve seal with over-molded rubber gasket
Item No.
Mixing valve opening diam. Thickness Packaging
KMSMV235/114 4-1/2" – 114 cm 4 mil 1 unit
KMSMV10235/114 4-1/2" – 114 cm 4 mil 10 units
8.1 Schluter
®
-KERDI-KM Pipe seal
Item No.
Dimensions Thickness Packaging
KM5117/22 7" x 7" – 17 x 17 cm 4 mil 5 units
14.2 Schluter
®
-SHOWERPROFILE-WS Support profile
Item No.
Height Length
SPWS 19 AE/100 5/16" - 8 mm 39" - 1 m
SPWS 19 AE 5/16" - 8 mm 8' 2-1/2" - 2.5 m
14.2 Schluter
®
-SHOWERPROFILE-WSK Support profile - retrofit
Item No.
Height Length
SPWSK 52 AE/100 5/16" - 8 mm 39" - 1 m
SPWSK 52 AE 5/16" - 8 mm 8' 2-1/2" - 2.5 m
14.2 Schluter
®
-SHOWERPROFILE-WSC Semi-circular lip insert
Item No.
Height Length
SPWSC 16 GS/100 5/16" - 8 mm 39" - 1 m
SPWSC 16 GS 5/16" - 8 mm 8' 2-1/2" - 2.5 m
14.2 Schluter
®
-SHOWERPROFILE-WSL Straight lip insert
Item No.
Height Length
SPWSL 30 T/100 5/16" - 8 mm 39" - 1 m
SPWSL 30 T 5/16" - 8 mm 8' 2-1/2" - 2.5 m
14.2 Schluter
®
-SHOWERPROFILE-WSK-EK End cap
Item No.
Height
EK/SPWSK 52 AE 5/16" - 8 mm
8.1 Schluter
®
-KERDI-KERS Preformed corner
Item No. Thickness Packaging
KERS 20L
4 mil Left inside corner – 3/4" (20 mm)
KERS 28L
4 mil Left inside corner – 1-3/32" (28 mm)
KERS 20R
4 mil Right inside corner – 3/4" (20 mm)
KERS 28R
4 mil Right inside corner – 1-3/32" (28 mm)