Schluter®-KERDI-BOARD Substrate, building panel, bonded waterproofing
Schluter®-KERDI-BOARD The universal substrate for tiles Flat. Level. Plumb. Square. No matter the quality, cost, or extravagance of a tile installation project, the integrity of the tile is only as good as its foundation. Many substrates encountered in new buildings and renovation projects are unsuitable for tile installation, especially in areas with high moisture. This can require comprehensive preparation and waterproofing measures.
Fleece webbing Reinforcement layer Extruded polystyrene foam Reinforcement layer Fleece webbing Advantages of KERDI-BOARD • Even, impact-resistant, and rigid • Waterproof and temperature-resistant • Thermally insulating and dimensionally stable • Simple to cut using printed gridlines • Quick and easy to install • Lightweight, easy to handle and transport • Contains no cement or fiberglass • Designed to create load-bearing tile substrates KERDI-BOARD is a versatile building panel that is sta
Shower & Bathtub Surrounds Tiled showers and bathtub surrounds require proper moisture management to ensure successful long-term performance. In addition to being lightweight and easy to cut with a utility knife, KERDI-BOARD is inherently waterproof and vapor-retardant. When used in conjunction with the Schluter®-Shower System, KERDI-BOARD provides an integrated tile backing and moisture management system for tiled showers and bathtub surrounds.
Showers Walls Using KERDI-BOARD to build walls over stud framing in wet areas is an efficient alternative to using gypsum board. While cement backer boards are moisture-resistant, they are not waterproof. Thus, additional measures must be taken to protect wall cavities from water and vapor penetration. KERDI-BOARD can be installed both vertically and horizontally using the screws and washers in our hardware assortment.
Partition Walls Sanitary installations frequently require partition walls to create separate shower or toilet stalls or to divide rooms. The construction of such walls using masonry blocks or stud framing with sheathing is time-consuming and often requires further preparation before tiling can begin. KERDI-BOARD can be used to quickly and simply create stable and self-supporting partition walls for tiling.
Bathtub Platforms KERDI-BOARD is easily customizable and inherently waterproof, and thus, the perfect substrate for creating both standard and more intricate bathtub surrounds. Making little-to-no-mess while cutting, you can construct your bathtub platform easily, efficiently, and soundly.
Countertops Tiled countertops are often constructed with plywood decks, which are dimensionally unstable and moisture-sensitive. Additional work is required to prepare the surface for tile installation, which can be time-consuming. KERDI-BOARD is particularly suitable for building countertops and other work surfaces with tile coverings. KERDI-BOARD is dimensionally stable and waterproof and can be adhered directly to base cabinets, thus eliminating the need for labor-intensive preparation.
Suitable panel thicknesses 1-1/2" (38 mm) or 2" (50 mm) are recommended when adhering KERDI-BOARD directly to base cabinets.
Vanities & Shelving Create and customize storage solutions to suit your size and design specifications. Prefabricated vanities do not always fit your spatial situation and building vanities from traditional materials, using framing and sheathing, is time-consuming and labor-intensive. KERDI-BOARD allows you to configure a substrate that is ready for tile and to your liking. Schluter profiles make it easy to finish off the tile edges; there is no need to rely on specialty ceramic trim pieces.
© Hugo Sanchez Other Applications With eight thicknesses available, KERDI-BOARD can be used to build virtually any kind of substrate. Whether you need to even-out an existing problematic substrate, install a solid backing directly on stud frame structures, or build custom elements such as pipe or column coverings, KERDI-BOARD makes it quick and easy.
Over Existing Uneven Substrates Masonry walls and existing/mixed substrates are often unsuitable for direct application of tile because they can be uneven or difficult to bond to. KERDI-BOARD can be easily installed on concrete, masonry, and existing and mixed substrates. Depending on the condition of the existing wall areas, KERDIBOARD can be either fully embedded in thin-set mortar or spot-bonded. Spot-bonding the panels with thin-set mortar allows for adjustment to achieve plumb wall surfaces.
KERDI-BOARD-V Schluter®-KERDI-BOARD-V is a vertically grooved substrate and building panel that allows you to take your tiling project to the next level by incorporating rounded and curved elements in your design. As a dimensionally stable substrate, KERDI-BOARD can be easily used to create bathtub surrounds, freestanding curved walls, kitchen islands and more. Creating curved coverings for plumbing elements, duct work and columns can be easily accomplished.
Schluter®-KERDI-BOARD Thickness Dimensions 3/16" - 5 mm 48" x 64" - 122 cm x 162.5 cm 48" x 96" - 122 cm x 244 cm 3/8" - 9 mm 48" x 64" - 122 cm x 162.5 cm 48" x 96" - 122 cm x 244 cm 1/2" - 12.5 mm 48" x 32" - 122 cm x 81 cm 48" x 64" - 122 cm x 162.5 cm 48" x 96" - 122 cm x 244 cm 5/8" - 15 mm 48" x 96" - 122 cm x 244 cm 48" x 120" - 122 cm x 305 cm 3/4" - 19 mm 24-1/2" x 96" - 62.5 cm x 244 cm 1" - 25 mm 24-1/2" x 96" - 62.5 cm x 244 cm 1-1/2" - 38 mm 24-1/2" x 96" - 62.
Accessories 1 KERDI-BOARD-ZC is a U-shaped brushed stainless steel profile with a perforated topside, and a smooth underside with anchoring leg for finishing countertops or similar structures. 2 KERDI-BOARD-ZA is a U-shaped brushed stainless steel profile with two perforated sides designed for visible edges of partition walls and shelves. 3 KERDI-BOARD-ZFP is a flat plastic profile that can be attached behind the KERDI-BOARD-ZA for secure attachment of finishing hardware. Ideal for custom glass doors.
04/2018 © 2018 Schluter Systems L.P. www.schluter.com 552984 Schluter Systems L.P. • 194 Pleasant Ridge Road, Plattsburgh, NY • 12901-5841 • Tel.: 800-472-4588 • Fax: 800-477-9783 Schluter Systems (Canada) Inc. • 21100 chemin Ste-Marie, Ste-Anne-de-Bellevue, QC H9X 3Y8 • Tel.