Specification

WALL AND COUNTERTOP PROFILES
2
Application and Function
Wall Profiles
2.3 Schluter
®
-JOLLY is a finishing and
edge-protection profile for the outside
corners of tiled surfaces. It features a
trapezoid-perforated anchoring leg
that is secured in the mortar bond coat
beneath the tile, and an 87° sloped vertical
wall section that provides a decorative
finish and protects adjacent tiles.
The profile is available in chrome-plated solid
brass, color-coated aluminum, anodized
aluminum, and PVC. Schluter
®
-SCHIENE
features the same design as JOLLY and
is also available in solid brass, aluminum,
and stainless steel. Please see the
Schluter
®
-Systems Illustrated Price List for
more details. The range of available sizes
and finishes permits the matching of JOLLY
to a wide variety of tile and grout colors
and allows many design opportunities
through the use of contrasting colors. Other
applications include transitions for dado
coverings such as carpet, natural stone, or
cold-cured resin coatings. The integrated
joint spacer establishes a defined joint
cavity between the tile and the profile.
2.10 Schluter
®
-QUADEC is a finishing
and edge-protection profile for the outside
corners of tiled surfaces. It features a
trapezoid-perforated anchoring leg that is
secured in the mortar bond coat beneath
the tile and a reveal that forms a square
outer corner along the surface edge.
The profile is available in stainless
steel, anodized aluminum and Tuscan
color-coated aluminum. QUADEC allows for
modern decorative design and interesting
contrasts. The profile can be combined with
the QUADEC-FS feature strip profile and
the DESIGNLINE border profile for further
design options. In addition to its decorative
effect, the profile protects tile edges against
damage caused by mechanical stresses.
QUADEC, in stainless steel, is particularly
resistant to wear when used as edge
protection. It may also be used as a stair
nosing or floor transition profile. In addition,
QUADEC is suitable for transitions, corners,
or dado coverings with other covering
materials; for example, carpet, parquet,
natural stone tiles, or poured epoxy
coverings. The integrated joint spacer forms
a defined joint cavity with the tile.
Schluter
®
-QUADEC-K is a variant of
the profile without an anchoring leg. It
features an open cavity that is filled with
thin-set mortar to secure the profile in
the assembly. Alternatively, the profile may
be installed with an adhesive such as
Schluter
®
-KERDI-FIX. QUADEC-K is
installed in wall applications (e.g.,
wainscotings and bases) with coverings
up to 1/2" (12.5 mm) thick. The profile
is particularly suited for finishing edges in
retrofit applications, such as thin porcelain
panel installation over existing wall tiles.
QUADEC-K is available in anodized aluminum
and Tuscan color-coated aluminum.
Note: QUADEC in stainless steel does not
feature the integrated joint spacer. Matching
inside/outside corners and connectors are
available.
2.1 Schluter
®
-RONDEC is a finishing
and edge-protection profile for the outside
corners of tiled surfaces. It features a
trapezoid-perforated anchoring leg that is
secured in the mortar bond coat beneath the
tile and a reveal that forms a symmetrically
rounded outer corner with 1/4" (6 mm)
radius along the surface edge. The profile
is available in stainless steel, solid brass,
chrome-plated solid brass, anodized
aluminum, color-coated aluminum,
Tuscan color-coated aluminum and PVC.
RONDEC’s wide range of materials,
colors, and surface finishes allows for color
coordination with tile and grout and the
creation of interesting accents in decorative
designs. In addition to its decorative effect,
the profile protects tile edges against damage
caused by mechanical stresses. RONDEC,
in stainless steel, is particularly resistant
to wear when used as edge protection.
It may also be used as a stair nosing or
transition profile. In addition, RONDEC is
suitable for transitions, corners, or dado
coverings with other covering materials;
for example, carpet, parquetry, natural
stone tiles, or cold-cured resin coatings.
The integrated joint spacer forms a
defined joint cavity with the tile.
Note: RONDEC, in stainless steel and solid
brass, do not feature the integrated joint
spacer. Matching inside and outside corners,
including sink corners, and connectors are
available. Matching end caps are available
for RONDEC in stainless steel.
2.14 Schluter
®
-DECO-DE is a stainless
steel finishing and edge-protection profile
for 135° outside corners for tiled surfaces.
It features a trapezoid-perforated anchoring
leg that is secured in the mortar bond coat
beneath the tile and a reveal that forms
a flat surface. The profile is available in
stainless steel and brushed stainless steel.
DECO-DE allows for modern decorative
design and interesting contrasts. In addition
to its decorative effect, the profile protects
tile edges against damage caused by
mechanical stresses.
1.9 Schluter
®
-DECO-SG is an anodized
aluminum, decorative profile featuring a 1/2"
(12.5 mm) wide channel that provides a
shadow gap between tile courses or other
wall covering. The profile may also be used
as a support channel for glass walls, up
to a thickness of 3/8” (10 mm). DECO-SG
features a trapezoid-perforated anchoring
leg that is secured in the bond coat beneath
the tile.
2.12 Schluter
®
-INDEC is an anodized
aluminum finishing and edge-protection
profile for outside corners of tiled surfaces.
It features a trapezoid-perforated anchoring
leg that is secured in the mortar bond coat
beneath the tile, and the visible surface forms
a recessed decorative channel. INDEC can
be used as a transition or stop profile to a
door or window frame. Matching outside
corners are available.
135°
= H
= H
ED 90°