WA L L AN D COUNT E R T OP PR O F I L E S INNOVATIVE SOLUTIONS FOR CERAMIC AND STONE TILE FINISHING AND EDGE PROTECTION =H 11,5 2.3 Schluter®-JOLLY 2.5 Schluter®-RONDEC-DB 16.2 Schluter®-DESIGNBASE-SL EV 90° 45° 2.10 Schluter®-QUADEC 2.13 Schluter®-DIADEC 2.1 Schluter®-RONDEC 2.17 Schluter®-FINEC 2.11 Schluter®-QUADEC-FS 2 135° 2.2 Schluter®-DESIGNLINE ° 135 =H 2.6 Schluter®-ECK-E 2.8 Schluter®-RONDEC-STEP =H 2.14 Schluter®-DECO-DE 1.9 Schluter®-DECO-SG 2.7 Schluter®-ECK-K 2.
WALL AN D C O U N T ER TOP PR OFILE S Application and Function Wall Profiles 2.3 Schluter®-JOLLY is a finishing and edgeprotection profile for the outside corners of tiled surfaces. It features a trapezoid-perforated anchoring leg that is secured in the mortar bond coat beneath the tile, and an 87° sloped vertical wall section that provides a decorative finish and protects adjacent tiles.
WALL AN D C O U N T ER TOP PR OFILE S Schluter®-DIADEC-K is a variant of the profile without an anchoring leg. It features an open cavity that is filled with thin-set mortar to secure the profile in the assembly. DIADEC-K is installed in wall applications (e.g., wainscotings and bases) with coverings at least 1/4" (6 mm) thick. The profile is particularly suited for finishing edges in retrofit applications, such as tile installation over existing wall tiles.
WALL AN D C O U N T ER TOP PR OFILE S leg of the profile hides the exposed edge of the sub-assembly. In addition, the profile effectively protects tiles in the edge area from mechanical and impact stresses. The integrated joint spacer establishes a defined joint cavity between the tile and the profile. RONDEC-STEP is suitable for residential applications, e.g., stairs not exposed to heavy traffic, and countertops.
WALL AN D C O U N T ER TOP PR OFILE S 5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile; the profile should not be higher than the tiled surface, but rather up to approx. 1/32" (1 mm) lower. 5a. If the FINEC profiles, in aluminum, are used to create a 3 way external corner, into which the two upper profiles were fitted at an angle of 45°, cut the adjoining lower profile to size.
WALL AN D C O U N T ER TOP PR OFILE S DESIGNLINE 1. DESIGNLINE may be used with tiles that are 1/4" (6 mm) thick or greater. 2. Set tiles up to the area where DESIGNLINE is to be installed as a decorative strip. Apply a sufficient amount of thin-set mortar to this area and/or to the back of DESIGNLINE and press the profile into the mortar until its surface is flush with the tile. 3. Set the adjacent row of tiles. 4.
WALL AN D C O U N T ER TOP PR OFILE S 2.3 Schluter®-JOLLY *Color Codes Item No. H= mm - in. 3 4.5 6 8 10 11 12.
WALL AN D C O U N T ER TOP PR OFILE S Aluminum 2.10 Schluter®-QUADEC Item No. H= mm - in. Aluminum =H 4.5 6 8 10 12.
WALL AN D C O U N T ER TOP PR OFILE S Aluminum 2.10 Schluter®-QUADEC *Color Codes Item No. H= mm - in. 4.5 6 8 10 11 12.5 - 3/16 - 1/4 - 5/16 - 3/8 - 7/16 - 1/2 Color-coated aluminum (AC) BW W SP PG QG VG SB GS Bright white White Quartz grey Q 45 color* Q 60 color* Q 80 color* Q 100 color* Q 110 color* Q 125 color* Sand pebble Traffic grey Classic grey Black brown Black * To complete the item number, add the color code (e.g., Q 45 G). Accessories Item No.
WALL AN D C O U N T ER TOP PR OFILE S 2.12 Schluter®-INDEC Item No. Polished chrome anodized aluminum (ACG) Satin anodized aluminum H= mm - in. Aluminum (AE) ED 90°IN 8 - 5/16 10 - 3/8 11 - 7/16 12.5 - 1/2 80 AE IN 100 AE IN 110 AE IN 125 AE Accessories Item No. Outside corner 90° ED / IN profile item number* How to order corners: * To complete the item number for corners, add the corresponding profile item number (e.g., ED / IN 100 AE).
WALL AN D C O U N T ER TOP PR OFILE S Stainless Steel 2.1 Schluter®-RONDEC Item No. H= mm - in. Stainless steel =H 4.5 6 7 8 9 10 11 12.5 15 - 3/16 - 1/4 - 9/32 - 5/16 - 11/32 - 3/8 - 7/16 - 1/2 - 9/16 Stainless steel 316L (1.4404 = V4A) Stainless steel 304 (1.4301 = V2A) (E/V4A) (E) Brushed stainless steel 304 (1.
WALL AN D C O U N T ER TOP PR OFILE S 2.1 Schluter®-RONDEC Item No. H= mm - in. 6 8 10 12.
WALL AN D C O U N T ER TOP PR OFILE S Brass 2.1 Schluter®-RONDEC Item No. H= mm - in. Brass 6 8 10 12.5 (MC) =H 6 8 10 12.5 - 1/4 - 5/16 - 3/8 - 1/2 Polished chrome anodized aluminum (ACG) H= mm - in.
WALL AN D C O U N T ER TOP PR OFILE S 2.14 Schluter®-DECO-DE Item No. H= mm - in. Stainless steel 304 (1.4301 = V2A) (E) =H 8 10 11 12.5 =H - 5/16 - 3/8 - 7/16 - 1/2 DE DE DE DE 80 ES 100 ES 110 ES 125 ES Brushed stainless steel 304 (1.4301 = V2A) (EB) DE DE DE DE 80 EBS 100 EBS 110 EBS 125 EBS Length supplied: 8' 2-1/2" — 2.5 m Aluminum 1.9 Schluter®-DECO-SG Item No. H= mm - in. Satin anodized aluminum =W (AE) =H Bright chrome anodized aluminum (ACB) W: 12.
WALL AN D C O U N T ER TOP PR OFILE S 2.6 Schluter®-ECK-E 2.6 Schluter®-ECK-E Item No. W= mm - in. 37 37 mm - 1-15/32" mm - 1-1 (E) 5/3 2" r = 8 mm 5/16" Stainless steel 304 (1.4301 = V2A) Item No. Brushed stainless steel 304 (1.4301 = V2A) (EB) 90º Angle =H 135º 6 8 11 - 1/4 - 5/16 - 7/16 E37 V2A 60/150 E37 V2A 80/150 E37 V2A 110/150 - 1/4 - 5/16 - 7/16 (E) Length supplied: 8' 2-1/2" — 2.50 m E37 V2A EB 60/150 E37 V2A EB 80/150 E37 V2A EB 110/150 Length supplied: 6' 7" — 2.
WALL AN D C O U N T ER TOP PR OFILE S 2.7 Schluter®-ECK-KHK Item No. Item No. W= mm - in. W = 9/16" - 15 mm Accessories Brushed stainless steel 304 (1.4301 = V2A) (EB) Stainless steel 304 (1.4301 = V2A) (E) Outside corner, 90º Length supplied: 4' 11" — 1.50 m 15 r = 11/32" 9 mm - 9/16 KHK15 E/150 Inside corner, 90º (2-way) Inside corner, 90º (3-way) KHK15 EB/150 Length supplied: 6' 7" — 2.00 m 15 - 9/16 KHK15 E/200 KHK15 EB/200 Length supplied: 8' 2-1/2" — 2.
WALL AN D C O U N T ER TOP PR OFILE S 2.11 Schluter®-QUADEC-FS Item No. H= mm - in. 2" - 50 mm =H 2-7/8" - 72 mm 8 (AE) Polished chrome anodized aluminum (ACG) Satin nickel anodized aluminum (AT) Brushed antique bronze anodized aluminum (ABGB) QF8/50 AE QF8/50 ACG QF8/50 AT QF8/50 ABGB Satin anodized aluminum - 5/16 Length supplied: 8' 2-1/2" — 2.50 m Accessories Item No.
WALL AN D C O U N T ER TOP PR OFILE S 2.9 Schluter®-RONDEC-CT Item No. H= mm - in.
Schluter® Systems Wall and Countertop Profiles 5-Year Limited Warranty LIMITED WARRANTY COVERAGE: Subject to the conditions and limitations as stated in this Schluter® Systems Wall and Countertop Profiles 5-Year Limited Warranty (the “Limited Warranty”), Schluter Systems warrants that its Schluter®-JOLLY, Schluter®-SCHIENE, Schluter®-DESIGNBASE-SL, Schluter®-RONDEC-DB, Schluter®-QUADEC, Schluter®-QUADEC-K, Schluter®-DIADEC, Schluter®-DIADEC-K, Schluter®-QUADEC-FS, Schluter®-RONDEC, Schluter®-FINEC, Schluter
